V45 '83 V45 SABRE, MAGNA ADDENDUM VALVE GUIDE DRIVER 07942-3290200 ATTACHMENT 07943—M B00000 6. CYLINDER HEAD VALVE SERVICE INFORMATION TOOLS Special Attachment 07943—MB0000 VALVE GUIDE REPLACEMENT Drive new guides in from the rocker arm side of the cylinder head. NOTE: 1 Cylinder head heat should still be at 100°C (212°F) for installation of the new guides. 7. CRANKSHAFT/PISTON SERVICE INFORMATION SPECIFICATIONS ITEM STANDARD SERVICE LIMIT PISTON Ring end gap top 0.15-0.30 mm (0.006-0.012 in) 0.50 mm (0.02 in) Ring end gap second 0.15-0.30 mm (0.006-0.012 in) 0.50 mm (0.02 in) 8. TRANSMISSION GEAR TOOTH CONTACT PATTERN CHECK COUNTERSHAFT/OUTPUT DRIVE GEAR ADJUSTMENT SHIMS A: 0.4 mm (0.016 in) B: 0.45 mm (0.018 in) C: 0.5 mm (0.020 in) D: 0.55 mm (0.022 in) E: 0.6 mm (0.024 in) COUNTERSHAFT INSPECTION For 1983 models it is no longer necessary to select an output gear case gasket before selecting a countershaft spacer. After backlash inspection, if there is no other reason for selecting a new gear case gasket (see page 13-16), simply install the countershaft assembly on the lower crankcase with the existing gasket. Then select a spacer using the procedure described on page 13-18 if necessary. 384 Date of Issue: October, 1982 0 HONDA MOTOR CO., LTD. 25-22