REAR WHEEL/SUSPENSION/BRAKE SABRE MAGNA Remove the shock absorber from the press. Instan the back-up plate and stop ring. Place the shock absorber back in the press with the air valve up. Drain 170 cc (5.8 oz) of ATF by slowly compressing the shock absorber. ATF TO BE REMOVED: 170 cc (5.8 oz) Remove the shock absorber from the press. Remove the hose and install the air valve. Install the shock case boot. INSTALLATION Apply paste grease (containing more than 45% of molybdenum) to the upper and lower mounting bushings. NOTE Use paste grease (containing more than 45% of molybdenum) as follows: MOLYKOTE G PASTE manufactured by Dow Corning, U.S.A. Sta-Lube NLGI #2, U.S.A. Other lubricants of equivalent quality. Install and torque the upper mount bolt. TORQUE: 38-48 N-rn (3.8-4.8 kg-m, 28-35 ft-lb) OIL SEAL DRIVER ATTACHMENT SHOCK ABSORBER UPPER MOUNTING BOLT 298 Date of Issue: May, 1982 O HONDA MOTOR CO., LTD. 17-14