V45 REAR WHEELMUSPENSION/BRAKE OIL SEAL REPLACEMENT Remove the shock case boot. BOOT STOP RING BACK-UP PLATE OIL SEAL DRIVER Remove the air valve cap and release air pressure by depressing the air valve stern. Remove the air valve stem and connect a hose to the air valve hole of the shock. Press the back-up plate and oil seal in with the oil seal driver. Remove the stop ring and remove the back-up plate. ATF (300 cc/10.1 oz) OIL SEAL DRIVER ATTACHMENT Pour 300 cc (10.1 oz) of ATF in a clean container. Place the shock absorber in a press with an Oil Seal Driver Attachment as shown. Place the hose in the oil and compress and release the shock absorber several times until the damper is filled with oil. CAUTION: Do not compress the shock more than 40 mm (1.6 in). Date of lssue: May, 1982 295 O HONDA MOTOR CO., LTD. 17-11