V45 REAR WHEEL/SUSPENSION/BRAKE Tighten the three gear case nuts. TORQUE: 60-70 N•m (6.0-7.0 kgm, 53-51 ft-lb) Tighten the axle pinch bolt. TORQUE: 20-30 N•m (2.0-3.0 kg-m, 14-22 ft-lb) Place the brake rod through the brake arm pin and install the brake adjusting nut. Tighten the brake panel stop bolt. TORQUE: 35-45 N.m (3.5-4.5 kg-m, 25-33 ft-lb) Adjust the rear brake (page 3-17). BRAKE PANEL STOP BOLT AXLE PINCH BOLT BRAKE ADJUSTING NUT REAR AXLE REAR BRAKE PANEL LINING THICKNESS INSPECTION Measure the rear brake lining thickness. SERVICE LIMIT: 2.0 mm (0.08 in) DISASSEMBLY Remove the rear brake arm. Remove the cotter pins and brake shoes. ASSEMBLY Apply grease to the anchor pins and brake cam. Contaminated brake linings reduce stopping power. Keep grease off the brake linings. Wipe any excess grease off the cam. Install the brake cam. Install the brake shoes. Install new cotter pins. 17-8 292 Date of Issue: October, 1982 © HONDA MOTOR CO., LTD.