HONDA V45 HYDRAULIC BRAKE Measure the master piston O.D. SERVICE LIMIT: 15.82 mm (0.623 in) Check the primary and secondary cups for damage before assembly. ASSEMBLY CAUTION: Handle the master cylinder piston, cylinder and spring as a set. Assemble the master cylinder. Coat ali parts with clean brake fluid before assembly. Install the spring and primary cup together. Dip the piston cup in brake fluid before assembly. CAUTION: When installing the cups, do not allow the lips to turn inside out. Be certain the circlip is seated firmly in the groove. Install the piston and clip. Install the boot. Place the master cylinder on the handlebar and install the holder and the two mounting bolts. Tighten the top bolt first. Install the oil hose with the bolt and its two sealing washers. Install the brake lever. Fill the reservoir to the upper levei and bleed the brake system according to page 16-4. BRAKE HOSE 279 Date of issue: January, 1982 © HONDA MOTOR CO., LTD. 16-9