V45 FRONT WHEEL/SUSPENSION PLAY WHEEL BEARING INSPECTION Check wheel bearing play by placing the wheel in a truing stand and spinning the wheel by hand. Replace the bearings with new ones if they are noisy or have excessive play. SERVICE LIMIT: 0.03 mm (0.001 in) WHEEL INSPECTION Check the rim runout by placing the wheel in a truing stand. Spin the wheel slowly and read the runout using a dial indicator. SERVICE LIMITS: RADIAL RUNOUT: 2.0 mm (0.08 in) AXIAL RUNOUT: 2.0 mm (0.08 in) NOTE: The wheel cannot be repaired and must be replaced with a new one if the service limits are exceeded. AXLE INSPECTION Set the axle in V blocks and measure the runout. The actual runout is 1/2 of the total indicator reading. SERVICE LIMIT: 0.2 mm (0.01 in) 249 Date of Issue: May, 1982 ID HONDA MOTOR CO., LTD. 15-21