HONDA V45 MAGNA FRONT INHEEL/SUSPENSION TOOLS Special Hex. wrench, 6 mm Snap ring pliers Fork seal driver Steering stem socket Attachment Bearing race remover Bearing race remover Steering stem driver Driver shaft disassembly tool B Common Driver Attachment, 42 x 47 mm Pilot, 15 mm Lock nut wrench, 30 x 32 mm Extension bar 07917-3230000 or commercially available 07914-3230000 or commercially available 07947 —37 10101 07916-3710100 07946-3710700 07946-3710500 07953-4250002 07946-3710601 or 07946-3710600 07964—M B00200 07749-0010000 07746-0010300 07746-0040300 07716-0020400 or commercially available 07716-0020500 or commercially available TROUBLESHOOTING Hard steering 1. Steering bearing adjustment nut too tight 2. Faulty steering stem bearings 3. Damaged steering stem bearings 4. Insufficient tire pressure Steers to one side or does not track straight 1. Unevenly adjusted right and left shock absorbers (V45 MAGNA) 2. Bent front forks 3. Bent front axle; wheel installed incorrectly Front wheel wobbling 1. Bent rim 2. Worn front wheel bearings 3. Faulty tire 4. Axle nut tightened properly Soft suspension 1. Weak for springs 2. Insufficient fluid in front forks 3. Front fork air pressure incorrect Hard suspension 1. Incorrect fluid weight in front forks 2. Front fork air pressure incorrect 3. Bent fork tubes 4. Clogged fluid passage 5. Clogged anti-dive orifice Front suspension noise 1. Worn slider or guide bushings 2. Insufficient fluid in forks 3. Loose front fork fasteners 4. Lack of grease in speedometer gearbox 231 Date of Issue: October, 1982 0 HONDA MOTOR CO., LTD 15-3