MAGNA DRIVE TRAIN Remove the damper cam spring. Measure the damper cam spring free length. SERVICE LIMIT: 99 mm (3.9 in) DAMPER CAM SPRING FREE LENGTH DAMPER CASE Remove the damper case and 0-ring from the drive shaft. Fill the damper case with the recommended type and amount of lubricant. RECOMMENDED OIL: HYPOID GEAR OIL API, GL-5 Above: 5°C141°F: SAE /i90 Below: 5°C/41°F: SAE #80 OIL CAPACITY: 80 cc (2.7 oz). ASSEMBLY Install the damper cam spring into the damper case. Drive the oil seal guide and oil seal in with the driver and attachment. Assemble the remaining parts in the reverse order of disassembly. NOTE: Replace the 0-ring, oil seal and stop ring with new ones when reassembling the drive shaft. 0-RING DRIVE SHAFT ATTACHMENT, 37 x 40 mm 07746-0010200 213 Date of Issue: May, 1982 0 HONDA MOTOR CO., LTD. 14-5