V45 TRANSMISSION Press in a new bearing and make sure it rotates freely. ATTACHMENT 52 x 55 mm PILOT, 30 mm 07746-0010400 07746-0040700 Place the bearing holder into a vise with soft jaws. Install and tighten a new bearing outer race lock nut to the specified torque value. TORQUE: 90-110 N.m (9.0-11.0 kg-m, 65-80 ft-lb) Torque wrench scale reading: 80-110 N•m (8.0-10.0 kg-m, 58-72 ft-lb) OUTPUT DRIVEN GEAR INSTALLATION NOTE: Remove the center guide from the dis/ assembly tool before using. When the gear set, driven gear bearing and/ or gear case has been replaced, use a shim 0.30 mm (0.012 in) thick for initial reference. Place the output driven gear bearing holder into a press. Then press in the output driven gear. Install the o-ring and correct shim. DIS/ASSEMBLY TOOL 07965-3710100 Date of Issue: October, 1982 193 © HONDA MOTOR CO., LTD 1 3- 1 1