V45 COOLING SYSTEM Connect the water pipe to the upper radiator hose and tighten the hose band. Secure the water pipe to the air chamber with the screw. SCREW HOSE BAND TEMPERATURE SENSOR LOCATING PIN GROUND WIRE Align the groove in the thermostat housing with the locating pin on the air chamber. Tighten the thermostat housing cover. NOTE: ITighten the ground wire terminal together with the cover bolt as shown. i Connect the wire lead to the temperature sensor. Install the right air cleaner case, element and cover. Fill the cooling system (page 6-3). INSTALLATION (V45 MAGNA) Insert the thermostat into the housing. Install a new 0-ring on the thermostat housing cover. Install the thermostat housing cover and tighten the bolts. Connect the housing to the hoses and tighten the hose bands. Secure the thermostat housing to the air chamber with the bolt attaching the ground wire terminal at the same time. Install the right air chamber cover and radiator cover. Fill the cooling system (page 6-3). THERMOSTAT AIR CHAMBER GROUND WIRE HOUSING COVER THERMOSTAT HOUSING 89 Date of Issue: January, 1982 0 HONDA MOTOR CO., LTD. 6-7