V45 FUEL SYSTEM Turn each pilot screw in and carefully count the number of turns before it seats lightly. Make a note of this to use as a reference when reinstalling the pilot screws. CAUTION Damage to the pilot screw seat will occur if the pilot screw is tightened against the seat. Remove the pilot screws and inspect them. Replace them if they are worn or damaged. PILOT SCREW FUEL LINE INSTALLATION Install the pilot screws and return them to their original position as noted during removal. Perform pilot screw adjustment if new pilot screws are installed (page 4-18). NOTE Do not install new plugs on new pilot screw holes until after adjustment has been made. If you replace the pilot screw in one carburetor, you must replace the pilot screws in the other carburetors for proper pilot screw adjustment. CARBURETOR SEPARATION Remove the fuel lines from the carburetors. Remove the screws attaching the air chamber to the carburetors and separate the chamber and carburetors. AIR CHAMBER SCREWS Date of Issue: May, 1982 59 ©. HONDA MOTOR CO., LTD. 4-11