HONDA V45 MAINTENANCE WHEELS NOTE: Tire pressure should be checked when tires are COLD. Check the tires for cuts, imbedded nails, or other sharp objects. RECOMMENDED TIRES AND PRESSURES: V45 MAGNA Front Rear Tire size 110/90-18 611-4 130/90-17 68H [130/90-16 671-1] Cold tire Up to pres- 90 kg 32 32 sure (200 lbs) 4225, 2.25) (225, 2.25) psi toad (kPa, kg/crril ) 90 kg 32 40 (200 lbs) (225, 2.25) (280, 2.8) load to vehicle capacity load Tire BRIDGE- L303 0508 brand STONE DUNLOP F11 K127C Check the front and rear wheels for trueness (page 15-21 and 17-5). Measure the tread depth at the center of the tires. Replace the tires if the tread depth reaches the following limit: Minimum tread depth: Front: 1.5 mm (1/16 in) Rear: 2.0 mm (3/32 in) HERING NOTE: HEAD BEARINGS Check that the control cables do not interfere with handlebar rotation. Raise the front wheel off the ground and check that the handlebar rotates freely. If the handlebar moves unevenly, binds, or has vertical movement, adjust the steering head bearing by turning the steering head adjusting nut (page 16-38). NUTS, BOLTS FASTENERS Check that all chassis nuts and bolts are tightened to their correct torque values (Section 1) at the intervals shown in the Maintenance Schedule (Pages 3-3 and 3-4). Check all cotter pins, safety clips, hose clamps and cable stays. Date of Issue: May, 1982 0 HONDA MOTOR CO., LTD. 47 3-21