HORIZONTAL ADJUSTING SCREW VERTICAL ADJUSTING SCREW V45 MAINTENANCE BRAKE PEDAL FREE PLAY 20-30 mm (3/4-1-1/4 in) BRAKE LIGHT SWITCH NOTE: [Perform brake light switch adjustment after adjusting the brake pedal play and height. Adjust the brake light switch so that the brake light will come on when the brake pedal is depressed 20 mm (3/4 in), and brake engagement begins. Adjust by holding the switch body and turning the adjusting nut. Do not turn the switch body. NOTE: The front brake light switch does not require adjustment. BRAKE ADJUSTING NUT BRAKE LIGHT SWITCH ADJUSTING NUT Ae" NOTE: Perform brake pedal free play adjustment after adjusting brake pedal height. Check the brake pedal free play. FREE PLAY: 20-30 mm (3/4-1-1/4 in) If adjustment is necessary, turn the rear brake adjusting nut. rt. HEADLIGHT AIM V45 SABRE: Adjust vertically by turning the adjusting screw below the meter assembly (tachometer). re- Adjust horizontally by turning the adjusting screw on the headlight case. Turn the adjusting screw clockwise to direct the beam toward the right side of the rider. 43 Date of Issue: May, 1982 © HONDA MOTOR CO., LTD. 3-17