17750	A	Load Weight	26.10.34
	B	Load Weight	_
	C	Load Weight Side angle	_
	D	Load Weight Headstock angle	_
	E	Axle Retaining Clip flange	_
	F	Axle retaining clip	_
17751	A	Tank Filler	27.10.34
	B	Water Tank Sump	_
17752	A/B	Front Sand Box	27.10.34
	C	Sanding Ejector Pipe (rear)	_
	D	Sanding Ejector Pipe (front)	_
	E	Sand box lid	_
	F	Rear Sand Box Side Support plate	_
	H	Rear Sanding Pipe bend	_
	J	Front Sanding Pipe Bend	_
17753		Arrangement of Tipping platform	22.10.34
17754	A	Duplex Steam Sanding valve	1.11.34
	B	3/4" Sand Trap	_
	C	Sanding Ejector	_
17755	A	Leading Buffers	30.10.34
	B	Trailing Buffer	_
17756	A	Air Reservoir bracket	30.10.34
	B	Pump Box Rear Support with extra drilling in engine rear channel	_
	C	Pump Box front support with extra drilling in engine front channel	_
	D/E	Pump Box Foot with Extra Drilling in pump box	_
17757	A	Rear Sand Box Drilling layout	29.10.34
	B/C	Sanding Pipe Bracket and Clip (front)	_
	D/E	Sanding Pipe bracket (rear)	_
	F	Oil Level Pipe adapter	_
	G	Extension Pipe (oil level pipe)	_
	H	Drivers Sanding Valve bracket	_
	K	Engine Casing Door Stop	_
17758	A	NOT USED, air vent stiffener plate	31.10.32
	B	NOT USED, air vent flange	_
	D/E	Tank Top Stay	_
	F	Tank F?????er Air Vent	_
	C	Tank Filler Seating support	_
17759		Arrangement of 8 Wheeled Trailer	31.10.34
17760		Arrangement of Sanding gear	31.10.34
17761	A	Extra Drilling in Tank for Water lifter	11.11.34
	B	Water Lifter Inlet pipe	_
	C	Hose Carrying bracket angle	_
	D	Discahrge Pipe	_
	E	Spark Arrester Baffle no. 2	_
	F	Spark Arrester Baffle no. 1	_
17762
17763		Arrangement of Water Gauge Stand	1.11.34
17764	A	Water Gauge Stand Plate	1.11.34
	B	Water gauge pipe tee	_
	D	Blast Nozzle Rod - top	_
	C	Water gauge pipe	_
	E	Blast Nozzle rod - bottom	_
	F	Blast Nozzle joint	_
17765	A	Accelerator pedal lever, NOT USED	31.10.34
	B	Accelerator Lever	_
	E	Foot Release Shaft Bracket	_
	F	Foot Release Pedal lever	_
	G	Control Pedal Shaft bracket	_
17766	A	Control Pedal Shaft Bracket boss	3.11.34
	B	Foot Brake Lever	_
	C	Accelerator Tube	_
	D	Foot Release Cross shaft	_
	E	Foot Brake Tube	_
17767		Funnel and Spark Arrester	3.11.34
	E	Funnel Extension	_
	F	Spark Arrester Discharge pipe door	_
	G	Discahrge Pipe Flange	_
17768		Arrangement of Reversing gear	15.11.34
17769		Arrangement of Funnel and Spark Arrester	5.11.34
17770	A	Compressor Front bracket	5.11.34
	B	Compressor Rear Bracket	_
17771		Arrangement of Steamstand	6.11.34
17772	A	Platform and Body Side support channel	6.11.34
	B/C	Platform Support plate	_
	D	Platform Support cross channel	_
	E/F	Platform Corner angle cleat (inner)	_
	G/H	Platform Corner angle cleat (outer)	_
	J	Tailboard Stiffener and Chute slide	_
	K	Chute Side packing	_
17773	A/B	Rear Corner angles	6.11.34
	E	Body Stanchions	_
	C/D	Front Corner angle	_
	F	Headboard Support channel	_
	G/J/H	Body Side Corner angle	_
17774	A	Headboard Support	8.11.34
	C/D	Tailboard Chute door	_
	E/F	Tailboard Bottom angle	_
	B	Tailboard Top Support	_
	G	Chute Door Rubbing strip	_
	H	Chute Rubbing strip	_
17775	A/B	Body Side Bottom Gauge conrer plate	8.11.34
	C	Tailboard Top angle	_
	D	Headboard Bottom angle	_
17776
17777	A	Main Oil Pipe bend (at header)	7.11.34
	C	Suction Pipe Flange (male)	_
	D	Suction Pipe Flange (female)	_
	B	Light Oil Pipe flange (oil heater)	_
	E	Suction Plug Tap Flange (female)	_
	F	Engine Isolating Valve Flange	_
17778	A	Arrangement of Blast Box	6.11.34
	B	Blast Box Bottom cover	_
	C	Adjustable Blast Nozzle	_
	D	Adjustable Blast Nozzle	_
	E	Non Adjustable Blast Nozzle	_
	F	Non Adjustable Blast nozzle	_
17779	A	RH Water Tank	26.4.35
	D	LH Water Tank	_
17780		Arrangement of Piping and Boiler compartment	20.11.34
17781		Arrangement of piping (tank end)	3.1.34
17782	A	Tailboard catch	9.11.34
	B	Tailboard catch pin	_
	C	Catch Bolt Ferrules	_
	D	Catch Bolt Block	_
	E	Tailboard Catch Guide	_
	F	Tailboard Top Core bar	_
	G	tailboard Catch Operating rod	_
17783	A	Tee for Adjustable Blast Nozzle	12.11.34
	B	Spindle for Tee Piece	_
17784	A	Tyre Hoist Inside bracket	12.11.34
	C/D	3'-6' Headboard support	_
	E	Headboard Protection plate	_
	F	Chain Stanchion	_
17785		Throttle valve body	13.11.34
17786
17787		Arrangement of Oil Fuel Pipes	18.11.34
17788		Arrangement of 'S' Model tractor	15.11.34
17789	A	Brake Shoe-feredo lining	15.11.34
	D	Spark Box stay	_
	B/E	Steering Gear casing packing plate	_
	C/F	Steering Gear casing packing plate	_
17790	A	Steam Pipe Elbow	16.11.34
	C	Regulator Bulb and Thermometer pocket holder adaptor	_
	B	Temperature Regulator Bulb holder	_
	D	Suction bend	_
17791		Arrangement of Waggon with Special Container body	17.11.34
17792	A/K	Injector Suction pipe - tank sump	12.10.34
	B/E	Suction pipe flange	_
	C/D	Suction Pipe clip	_
	F	Rubber hose (suction)	_
	H	Joint for Levelling elbow	_
	J	Leather washer	_
	L	Suction Pipe Joint	_
	M	Joint - tank filler support	_
17793	A/L	Stanchion Socket clip	20.11.34
	J/K	Hose carrying Bracket stay	_
		Side rail Angle	_
	B/C	Arrangement of Stanchion socket	_
	H	Hose carrying bracket extension	_
17794		Engine Exhaust Manifold	22.11.34
17795		Arrangement of Gear Box	26.11.34
17796	A	Rear Axle Layshaft Bevel	23.11.34
	B	Rear Axle Driving shaft bevel	_
	C	Layshaft Thrust Brg Housing	_
	D	Layshaft Thrust Brg Housing cover	_
	E	Driving Shaft Distance piece	_
17797		Arrangement of Firegrate and Ashpan	24.11.34
17798	A/B/C	Arrangement of Rear Mudguards	27.11.34
	D/E	Arrangement of Rear Mudguards	_
17799
17800
17801	A/B	Arrangement and Detail of Rear Mudguards	29.11.34
	C/D	Mudguard Top Stay	_
	E	Mudguard Top Stay Plate	_
	F/L	Mudguard Front Support plate	_
	G/H	Mudguard Front stay	_
	K	Mud Flap plate	_
17802
17803
17804	A	Body Side Hinge bar	3.12.34
	B	Body Side Rail	_
	C	Body End Rail	_
17805		Proposed Arrangement of S 4/4 Tar sprayer	3.12.34
17806	A	Smokebox Deflector	3.12.34
	B	Top Baffle (firedoor frame)	_
	C	Furnace Door Back plate	_
17807	A	Body Side Catch	4.12.34
	B	Tailboard Catch	_
		Bearer Gusset and Mudguard	_
	C	Headboard Protection plate	_
	D	Body Side Rail end	_
	J	Body Side stay	_
17808
17809		Arrangement of Injectors	17.12.34
17810	A	Control Column Index plate	5.12.34
		Valve Nameplates	_
		Valve Nameplates	_
	B	Pneumercator Tank gauge nameplate	_
	C	Main Steam to Burner nameplate	_
		Valve Nameplates	_
17811		Proposed Tie body	3.12.34
17812		Arrangement and Detail of Frame	5.12.34
17813		Arrangement Reversing Gear Box (spur wheel 2:1 ratio)	5.12.34
17814
17815		Vacuum Control Rod	6.12.34
		Vacuum Control Rod	_
17816	A	Front Trailer support	6.12.34
	C	Front Support Socket	_
	B	Rear Trailer support	_
	D	Socket Back plate	_
	E	Front Support Rubbing plate	_
	F	Rear Support pivot pin	_
17817	A	Driving Shaft Journal brg housing	7.12.34
	B	Driving Shaft Journal brg gland	_
	C	Driving Shaft Thrust brg housing	_
	D	Thrust Bearing Housing cover	_
	E	Driving Shaft Thrust bearing shim	_
17818		Reversing Gear ???? Body (spurwheel) 2:1 ratio	10.12.34
17819		Arrangement of Reversing Gear centre box (1 1/2 : 1 ratio)	15.12.34
17820		Arrangement of Side Reversing Bevel Box (bevel ratio 1:1)	22.12.34
17821		Proposed Front wheel with steel tyres	10.12.34
17822		Proposed Rear Wheel with steel tyres	10.12.34
17823	A	Rear Axle Driving shaft	11.12.34
	B	Alteration to layshaft pinion	_
	C	Layshaft Thrust Bearing collar	_
	D	Layshaft Thrust Bearing nut	_
	E/F/G	Layshaft Thrust bearing shimm	_
17824		White's SW Injector Fig 351
17825		Arrangement and Detail of Bunker (hand fired)	12.12.34
17826	A	Arrangement and Detail of Canopy roof	12.12.34
	B	Fulcrum Pin Bush	_
	C	Fulcrum Pin collar	_
	D	Fulcrum pin	_
	E	Fulcrum Pin Ring	_
17827		Arrangement of Footplate drilling	12.12.34
17828		Arrangement of Rear Axle Driving and Lay shafts	14.12.34
17829		Rear Axle Casing	12.12.34
17830
17831		Arrangement of Waggon	17.12.34
17832		Arrangement of Van Body	12.12.34
17833		Reversing Bevel Box Body (centre) ratio 1 1/2:1	20.12.34
17834	A	Rev. Bevel Body Box Cover (bevel ratio 1 1/2:1)	20.12.34
	B	Rev. Bevel Body Box Cover (side and centre)	_
	C	Bearing Cover (side and centre boxes)	_
	D	Spur Wheel Pinion (rev.gear box)	_
	E	Spur Wheel (rev.gear Box)	_
17835	A	Pressure Control Contact box	18.12.34
	B	Pressure Control Spring housing	_
	C	Rocking Arm (pressure control)	_
17836		General Arrangement of 8 way tipping trucker
17837		Outline Arrangement of S8 3 Way Tipper	19.12.34
17838	A	Tailboard Hinge bracket	19.12.34
		Headboard Stiffener	_
		Outrigger	_
	F	Corner stiffener	_
	G	Rear Door catch Bolt	_
	H	Rear Door catch plate	_
	J	Rear Door Hinge bracket	_
17839		Turplat Nowelo' buffer	9.1.35
17840		Arrangement of Engine	7.6.33
17841		Arrangement of Steam Stand	30.4.35
17842	A	Side Reversing Bevel Box body (bevel ratio 1:1)	28.12.34
	B	Side Reversing Bevel Box cover (bevel ratio 1:1)	_
	C/D	Mitre Wheels (side rev box)	_
	E	Spindle (large spur wheel)	_
17843		Arrangement and Detail of Steel tipping body	20.9.34
17844		Arrangement of Single Water Filter	24.5.35
17845
17846	A	Driving Shaft - front	2.1.35
	B	Thrust Bearing Gland (drive shaft)	_
	C	Control Pedal Shaft Bracket	_
17847
17848	A	Pressure Control Contact Box	8.1.35
	B	Contact Box Cover	_
17849	C/D	Mudguard Rear Stay	21.1.35
	A	Footboard Stiffener plate	_
	E	Mudguard Protection plate	_
	B/G	Footboard Stiffener	_
	F	Footboard stiffener plate	_
17850		Arrangement of Pressure control	8.1.35
17851
17852		Proposed Arrangement of Tar Sprayer	12.1.36
17853	A/B	Sliding Doors (with extra drilling in body)	14.1.35
	C	Door Lifting Pin	_
	D	Lifting Bar Fulcrum boss	_
	E	Fulcrum Pin plate	_
	F	Inner slide plate	_
17854	A/B	Outer Slide plate	15.1.35
	C	Centre Slide plate	_
	D/E	Door Centre Stiffener	_
	G	Door Lever bar	_
	F	Door Centre Guide	_
	J	Floor Bearer cleat	_
	H	Lever bar extension	_
	K	Floor Bearer Gusset	_
17855	A	Suspension Link Top ball	15.11.35
	B	Suspension Link Rubber ring	_
	C/D	Suspension Link top ball seat	_
	E	Engine Suspension cover	_
	F	Engine Suspension base	_
	G	CANCELLED	_
	H	Shim	_
17856		Roof Bows	16.1.35
	C	Bows Stanchion	_
	D	Headboard Bow	_
17857	A	Bevel Gear (rev. gear box, centre)	16.1.35
	B	Bevel Pinion (rev. gear box, centre)	_
	C	Bevel Gear Shaft (centre box)	_
	D	Spindle (small spur wheel)	_
17858		Arrangement of Wheels and Axles	17.1.35
17859	A/F	Special Coupling Spider	15.1.35
	B	Bearing Distance piece	_
	D	Mitre Wheel Spindle (side rev:box)	_
	C	Bevel Pinion Spindle (centre box)	_
	E	Mitre Wheel Spindle	_
17860
17861	A	Exhaust Drain Box	17.1.35
	B	Engine Oil Gauge 'Y' piece	_
	C/D	Steam and Exhaust Pipe support bracket	_
	E/F	Steam Pipe support bracket	_
17862	A	Oil Overflow nipple	8.3.35
		Layshaft Thrust washer	_
	C	Crankshaft Pinion Oil Thrower	_
	D	Driving Gear Oil thrower	_
	E	Driving gear	_
	F	Crankshaft Pinion	_
17863		Water Tank (aux)	18.1.35
17864	A	Throttle Valve support bracket	1.2.35
	B	Throttle Valve cover	_
17865
17866	A	Throttle Valve seat	24.1.35
	B/F	Flange(main steam pipe)	_
	C	Bell Crank (throttle)	_
	D	Bell Crank Pin (throttle)	_
	E	Cover plate	_
	G	Bell Crank	_
17867		Control Column base	26.1.35
17868	A	Arrangement of Water Level Gauge (tank)	25.1.35
	B	Water Level Gauge Base bracket	_
	C	Level Indicator (float)	_
	D	Water level Gauge valve nut	_
	E	Water level gauge top adaptor	_
17869	A	Exhaust Ball Branch	25.1.35
	B	Steam Ball Connection	_
17870		Sentinel Patent Water Tube boiler	5.2.35
17871
17872
17873	A	Reversing Spindle nut	30.1.35
	B	Sliding Trunnion (rev.spindle nut)	_
	C	Reversing Spindle	_
	D	Throttle Control lever	_
17874		Arrangement of Throttle valve	30.1.35
17875
17876
17877	A	Flange (male)	28.2.35
		Pipe flange	_
		Pipe flange(male)	_
		Pipe flange	_
	B	Special Flange (on soot blower cock)	_
	N	Special Whistle flange	_
17878	A	Steam Pipe (ball to ball)	1.2.35
	B	Steam Pipe to engine	_
	C	Exhaust Pipe (ball to ball)	_
	D	Exhaust Pipe to engine	_
	E	Exhaust Pipe	_
17879
17880		Arrangement of Tank Waggon	2.2.35
17881	A	Steam and Oil Valve rocker	5.2.35
		Steam valve seat	_
	C	Steam Valve stem	_
	D	Steam Stop Valve Seat (steam)	_
	E	Pilot Valve seat	_
	F	Pilot Adjusting valve	_
	G	Oil valve stem	_
17882		Oil Fuel Gear, Steam and Oil Valve body	6.2.35
17883
17884	A/B	Rear Sand Pipe (RH shown)	5.2.35
	C/D	Front Sand Pipe (RH shown)	_
17885	A	Spring Plate	7.2.35
		Stop valve stem	_
	C	Pilot Adjusting Valve bush	_
	D	Stop Valve stuffing box	_
	E	Control Valve stuffing box	_
	G/K	Steam and Oil Valve piston guide	_
	H	Stop valve seat (oil)	_
	J	Stop Valve Stuffing box (oil)	_
17886		Arrangement of 1025 gall. Aluminium tank on carrier 6AX chassis	8.2.35
17887		Arrangement of tar Tank Waggon	8.2.35
17888	A	Hand Control Spindle	11.2.35
	B	Steam and Oil Valve Rocker	_
	C	Fulcrum Pin Jaw (oil and steam valve)	_
	E	Steam valve stem	_
	F	Priming Nut for combined oil and steam valve	_
	G	Oil valve connecting link	_
17889		Arrangement of combined Steam and Oil valve (for oil fuel gear)	7.2.35
17890		Arrangement of Oil Tank Support
17891	A	Adjustable Blast Nozzle	13.2.35
	B	Adjustable Blast Nozzle	_
	C	Blast Nozzle Rod - top	_
	D	Blast Nozzle Rod - bottom	_
17892		Blast Box Bottom cover	13.2.35
17893	A	Reversing Gear box	4.7.35
	B	Reversing Gear box cover	_
17894	A	Control Column Index plate	18.2.35
	B	Throttle Shaft	_
	C	Sand Valve Ejector body	_
17895		Arrangement of Control Column
17896		Arrangement of Boiler Mountings	19.2.35
17897	A	Gear Box Extension Bearing housing	5.7.35
	C	Reversing Gear wheel (driving)	_
	D	Reversing Gear wheel(driven)	_
	B	Gear Box Extension Bearing Spindle	_
	E	Reversing Gear wheel(idler)	_
	F	Gear Wheel Spindle(idler)	_
17898		Arrangement of Engine Suspension link	21.12.35
17899		Arrangement of Engine suspension	22.2.35
17900	A	Bearing Housing Pedestal Casting	23.7.35
		Bearing Housing Pedestal	_
	H	Guide Block (throttle)	_
	J	Guide Block cover plate (vac)	_
	F	Throttle Valve Bellcrank	_
		Throttle valve packing	_
	K	Throttle Lever spindle	_
	L	Reversing Shaft end for 1 1/2" 0/D tube	_
17901		Arrangement of sand valve ejector	25..2.35
17902
17903	A	14'-0' x 7'-0 3/4' flat platform	26.2.35
	B	Chain Stanchion	_
	C/D/F/G	Arrangement of Stanchion socket	_
17904		Arrangement of Reversing Gear box	28.6.35
17905		Modification to Frame(3284A)	27.2.35
17906	A	Trailer Headboard Arrangement	28.2.35
	B/C	Front Crossbear and headboard Support bracket	_
	F	Headboard Cope bar	_
	D/E	Headboard Corner angle	_
17907		Cross Shaft Bearing bracket	16.5.35
		Boss	_
	H	Throttle Cross Shaft (rear)	_
	J	Throttle Cross Shaft (forward end)	_
	K	Vac. Cross Shaft (infront column)	_
	L	Vac. Cross shaft (rear end)	_
	M	Vac. Cross Shaft (in rear column)	_
17908
17909
17910	A	Arrangement of Headboard	1.3.35
	B	Headboard Protection plate	_
	C/D	Headboard Support	_
17911		Arrangement of Tyre carrier and trailer steam brake	4.3.35
17912	E	Steam Trap Brackets	24.2.36
	F	Steam Trap Distance piece	_
	C	Brake Cylinder support channel	_
	A/G/B/H	Support Channel clamp	_
	D	Rear Cross support	_
17913	A	Throttle lever Connecting link	5.3.35
		Rod end	_
		Throttle Control Rod	_
	C	Throttle Swing link bracket	_
	K	Lubricator Bracket	_
17914		Engine Suspension bracket	5.3.35
17915	A	Engine Suspension yoke	25.3.35
	B	Dust Cover	_
	C	Exhaust 'Y' Piece support bracket	_
	D	3/8" Special Wing nut	_
	E	1/2' "U" bolt	_
17916	A	Engine Suspension link	25.3.35
	C	Engine Suspension dust shield, NEVER USED	_
	D	Suspension Pin nut	_
	E	Spring for Ball Joint Dust cover, NEVER USED	_
17917		Arrangement of Oil Burning gear
17918	A	Arrangement of Compressor Support	6.3.35
	B/C	Compressor Support stay	_
	F	Compressor Sprocket rivet	_
	G	Compressor Sprocket centre	_
17919	A/H	Auxiliary Spiral Gear bush	6.3.35
	B	Oil Hole Ferrule	_
	C	Oil Trough Gauze	_
	D	Oil Trough Screen	_
	E	Oil Relief Valve seat	_
	F	Oil Relief valve cap	_
	G	Arrangement of Oil Relief Valve	_
17920		Arrangement of Lubricator drive
17921		Casing for Fuel Oil Tank	29.3.35
17922	A	Ejector Body Cover	5.3.35
	B	Ejector Valve	_
	C	Ejector Valve seat	_
	D	Ejector Valve gland	_
	E	Special nipple	_
17923		Crankcase
17924		Arrangement of Throttle valve
17925	A	Water Tank Filler	26.3.35
	B/F	Tank Steady Bracket	_
	C	Tank Strap End (inside)	_
	D	Tank Strap End (outside)	_
	E	Tank Suspension Bracket	_
17926		Arrangement of Water Tanks
17927		Canvas Cover	12.3.35
17928		Toolbox	11.3.35
17929	A	Tool Box	11.3.35
	B	Vacuum Ejector Suuport plate	_
	C	Vacuum Ejector Support bracket	_
17930
17931	A	Levelling Pipe flange	11.3.35
	D	Suction Pipe flange, NOT REQUIRED	_
	E	Suction Pipe flange, NOT REQUIRED	_
	B	Flange Stiffening plate	_
	C	Tank Levelling pipe	_
	F	Suction Pipe ( 1 1/4' cock)	_
	G	Suction Pipe ( 1 1/2' cock)	_
17932		Main Oil Tank and Service tank	11.3.35
17933	A	Tank Suspension Strap inside	27.3.35
	B	Tank Suspension Strap outside	_
	C	Eyebolt for Levelling Pipe support	_
	D	Tank Packing Block centre	_
	E	Tank Packing Block (outs)	_
	F/G	Suction Pipe Support plate	_
	H	Tank Suspension strap	_
	J	Tank packing block	_
17934		Canvas Cover	12.3.35
17935	A	Driver's Sanding Valve body	13.3.35
		Driver's Sanding Valve ????	_
17936		Development of Boiler shell	14.3.35
17937		Arrangement Tar Sprayer Gear	14.3.35
17938	A/B	Bracket for feed Pump Control Shaft	12.3.35
	C/D	Bracket for feed Pump Control Shaft	_
	E	Stiffening Plate on Partition	_
	G	Feed Pump Control shaft	_
17939		Feed Pump Check valve deflector	15.3.35
17940		Arrangement of Power take off	18.3.35
17941	A	Safety Valve	18.3.35
		Cap for Pump Support bracket	_
		Lub. Pump Support bracket	_
		Felt Retaining flange	_
	F	Lub-Conn Rod Special end	_
	J	Special Pin (lub conn rod)	_
	K	Lub Conn Rod end	_
17942	A/F	Exhaust Pipe Split Flange	18.3.35
	B	Steam Pipe to Engine	_
	C	Exhaust Pipe	_
	D	Steam Pipe (vertical)	_
	E	Exhaust Pipe	_
17943
17944		Arrangement of Cab and Saddle bunker	21.3.35
17945	A	Exhaust Pipe	21.3.35
	B	Steam Pipe	_
	C	Steam Ball Joint socket	_
	D	Exhaust Pipe Suspension plate	_
	E	Steam Pipe Syspension plate	_
17946		Saddle Bunker Bottom plate	22.3.35
	F	Saddle Bunker Back plate	_
	G/H	Saddle Bunker Back plate (vertical)	_
	J/K	Back Plate Stiffening bar	_
17947	A	LH Side Bunker Bottom plate	23.3.35
	B	RH Side Bunker Bottom plate	_
	C	LH Side Bunker plate	_
	D	RH Side Bunker plate	_
	E	LH Side Bunker Support angle	_
	F	RH Side Bunker Support angle	_
17948	A	Funnel	25.3.35
	B	Funnel	_
17949	A	Boiler Support Channel	25.3.35
	B	Boiler Foot Distance piece	_
	C	Rear Footplate	_
	D	Main Footplate cleat	_
	E	Leading Buffer Beam	_
	F	Trailing Buffer beam	_
17950	A	LH Side Bunker Plate Bottom angle	25.3.35
	B	RH Side Bunker Plate Bottom angle	_
	C/D	Bunker Back Plate Support angle	_
	D	Reversing Rod Cover	_
		Funnel Outer Casing	_
	F	Inner Funnel	_
	G	Sandbox Handle Bracket	_
17951	A	Exhaust 'Y' piece support bracket	26.3.35
	B/E	Rear Engine Steam Pipe	_
	C/F	Front Engine Steam pipe	_
	D	Steam Pipe	_
17952
17953	A	Smokebox Blast Pipe	27.3.35
	B	Blast Pipe bend	_
	C	Male Flange for Blast Pipe	_
	D	Female Flange for Blast Pipe	_
17954	A	Smokebox Bottom plate	28.3.35
	B	Revised Blastbox arrangement	_
17955		Assembly of Grate Modification
17956	A	Centre Firebar	2.4.35
	B	Outer Firebar	_
	C	Outer Firebar Shallow section	_
	D	Outer Firebar clip	_
	E	Tie Rods	_
	F	Tie Rod plate	_
	J	Firebar Support	_
	H	Ferrules for Rivets on Outer F'bar	_
17957		Water Tank	1.4.35
17958		Underslung Water Tank	1.4.35
17959	A	Steam and Oil valve Rocker	1.4.35
	B	Steam and Oil Valve Cable guide	_
	C	Stool for Oil Heater coil	_
	E	Oil Heater coil	_
	H/J/G	Filter Gauze for Oil Sevice tank outlet	_
17960	A	Casing for Oil Tank Support (inner)	1.4.35
	B	Casing for Oil Tank Support (outer)	_
17961
17962
17963		Arrangement of Chain Guards, dynamo drive, etc	3.4.35
17964		Light Oil Tank	4.4.35
17965	A	Alteration to Steam Valve Spindle of Weir pump	5.4.35
	B	Handle for Steam Valve of Weir pump	_
	C	Bracket for Burner control	_
	D	Tank Boss (oil delivery)	_
	E	Boss for Oil Level cock	_
	F	Heater Coil Cover	_
	G	Sprocket Weir Pump Steam Valve spindle	_
17966		Arrangement of Water tanks	16.4.35
17967		Arrangement of Pipes in Boiler Comp t	8.4.35
17968		Arrangement of 100 HP Stationary Power Unit
17969	A	Water Tank Sump	8.4.35
	B	Tank Levelling pipe elbow	_
17970	A	Dynamo Support bracket	9.4.35
	B	Footplate Support bracket	_
	C	Chain Guard Connecting link	_
	D	Chain Guard Bracket	_
	E	Dynamo Chain Guard	_
	F	Chain Guard Support (LH)	_
	G	Chain Guard Support RH	_
17971	A/B	Headboard Support angle	10.4.35
	C/D	Tailboard Support angle	_
	E	Protection plate	_
	F	Bracing stay	_
17972		Layout of 4 Cylinder Single acting Engine on Boiler for 100 HP Stationary unit	10.4.35
17973		Sketch showing Pipe Slings	10.4.35
17974	A	Steam Brake leverB	9.4.36
	B	Brake Shaft	_
	C	Brake Screw Lever	_
	D	Brake Screw Lever collar	_
	E	Brake Release Spring bracket	_
17975		Arrangement of Brake Gear	12.4.35
17976		Arrangement of Tar Sprayer Waggon	18.4.35
17977	A	Seat Support with Tool Drawers	15.4.35
	B	Seat Support and Accum Box	_
	D/E/K	Name board Bracket	_
	F/G/L	Name board Bracket	_
17978		Boiler development	14.3.33
17979		Arrangement of Extra Drilling in Frames	18.4.35
17980	A/B	Casing for Top of Oil Tank	18.4.35
	C	Oil Level Indicator bush	_
	D	Oil Level Indicator flange	_
	E	Oil Level Indicator cap	_
	F	Oil Level Indicator guide	_
17981		Arrangement of Oil Tank	23.4.35
17982	A	Oil tank Filler Cap Flange	23.4.35
	B	Oil Tank Filler Flange	_
	C	Tank Filler Stiffener	_
	D	Tank Filler stiffener	_
	E	Tank Strap Stiffener	_
	F	Tank Sump Stiffener	_
	G	Tank Filler	_
17983		Footboard	24.4.35
17984	A/B	Tank Frame forging	24.4.35
	C	Tank Bottom packing	_
	D	Tank Bottom packing	_
	E/F	Main Oil Tank Filler	_
	G	Main Oil Tank Filler stiffener	_
17985		Oil Tank	30.4.35
17986	A	Arrangement of Platform Side angles	25.4.35
		Body Side angle	_
	D/E	Side Rail Angle (rear)	_
	F/G	Side Rail Angle (front)	_
17987	A	Driving Lever clip	2.7.35
	B	Side Lever Distance piece	_
	C/H	Hand Lever	_
	D	Trunnion Block pin	_
	E/J	Alteration to Spindle of 'Bodan' No.3 double acting plunger pump	_
	F	Backing Plate inside Light Oil Tank for Stop Valve bracket	_
	G	Stop valve bracket	_
17988	A	Water Level gauge Adapter (top)	29.4.35
	B	Water Level Gauge adapter (bottom)	_
17989		Arrangement of Boiler Feet fixing	30.4.35
17990	A	Driving Lever	25.1.35
	B	Adjustable Trunnion for Driving lever	_
	C	Collar	_
	D/E	Driving Rod jaw	_
	F	Special pin	_
		Driving rod	_
		Pump Carrying bracket	_
17991	A	Buffer Head	3.5.35
	B	Buffer Head Plate	_
	C/D	Buffer Safety Chain bracket	_
		Buffer Safety Chain Bracket , NOT REQUIRED	_
17992		Arrangement of Fuel Oil Service pump	23.7.35
17993	A	Drawgear Stirrup	7.5.35
	B	Buffer Spring Saddle	_
	C/G	Buffer Spring Saddle	_
	D	Buffer head cotter	_
	E	Draw Hook	_
	F	Draw Gear Safety chain	_
17994	A	Suspension Link	7.5.35
	D	Suspension Link top nut	_
	E	Upper Engine Suspension ball seat	_
	B	Engine Suspension Link nut	_
	C	Dust Cover Shroud (two halves)	_
	F/L	Suspension link	_
17995	A	Pivot Top Casting	7.5.35
	B	Pivot Bottom Casting	_
17996
17997	A	Levelling Pipe flange, CANCELLED	19.5.35
	B/C	Levelling Pipe	_
	D	Levelling Pipe Support	_
	E	Suction Pipe (1 1/4' cock)	_
	F	Suction Pipe (1 1/2' cock)	_
	G	Vent Pipe bend	_
	H	Tank Steady bracket	_
17998	A	Additional Drilling in frame	10.5.35
	B	Tyre Carrier stay (rear)	_
	C	Tyre Carrier stay (front)	_
17999		Water Tank Filler	11.5.35