Drawing No				Description		Date
	16000	A/B	Radius Rod bracket		4.8.33
		C/D	Radius Rod Bracket		_
		E	Accessory Tray		_
		F	Accessory Tray bracket		_
		G	Accessory Tray support		_
		H	Pole Stirrup packing		_
		J	Taillamp Adapter bracket		_
	16001	A	Arrangement of Rear Carriage		21.8.33
		B	Arrangement of Fore Carriage		_
	16002	A	Tipping Cylinder		2.8.33
		B	Front Spring pad		_
		C	Grease Retainer washer		_
		D	Grease Retainer ring		_
		E	Grease Retainer felt washer		_
	16003	A/H	Tank Manhole Door Joint		8.8.33
		B	Bye-pass Valve Flange joint		_
		C	Oil Pump Body Joint		_
		D	Oil Pipe Feed Pipe to Sump Joint		_
		E	Oil Pump Feed Pipe to Oil Pump Body joint		_
		F	Steam Branch Joint		_
		G	Cylinder Block joint		_
	16004	A	Rear Cross Channel		8.8.33
		B	Front Cross channel		_
	16005	A	Axle box keep		9.8.33
		B	Spring Link bracket		_
		D	Auxiliary Spring Pad - bottom		_
		C/E	Auxiliary Spring Top Pad and casing		_
		G	Axlebox End Cap		_
		F	Engine Suspension Link nut		_
	16006	A	Crankcase Oil Sump joint		9.8.33
		B	Rear Axle Oil Filler joint		_
		C	Water Level Gauge joint		_
		D	Safety Valve Cover joint		_
		E	Safety Valve discharge joint		_
		F	Feed Check Valve chest joint		_
			Joint Washer		_
	16007	A	Turn-table Cleat (front), CANCELLED - never used		11.8.33
		B/C	Tipping Cylinder Support channel cleat		_
			Rear Sub-frame cleat, CANCELLED - never used		_
		D	Turntable Pivot channel top		_
		E/F	Rear Spring channel		_
		G/H	Rear Spring Channel cross channel		_
		J/K	Arrangement of Truss and Brake bracket, CANCELLED		_
	16008		Proposed Arrangement of tank waggon		10.8.33
	16009	A/B	Bissel Truck Check Spring Bracket		10.8.33
		C/E	Bissel Truck Lifting bracket		_
		F	Check Spring Bracket Bush		_
		G/H	Check Spring pin		_
	16010	A	Wrist Pin Assembly		10.8.33
		B	Wrist Pin Washer		_
		C	Wrist Pin Stud		_
		D	Wrist Pin Washer (plate)		_
		E	Engine Flywheel		_
	16011	A/B	Rear Spring Rear Bracket		11.8.33
		C	Leading Frame Stretcher		_
	16012	A/B	Side Channel frame		31.8.33
		C	Frame Rear Cross channel		_
		D	Frame Front Cross channel		_
		E	Frame Centre Cross channel		_
		F	Tipping Cylinder Rear Cross channel		_
		G	Tipping Cylinder Front Cross channel		_
	16013		Stop Valve chest		27.4.33
	16014	A	Release Valve body		11.8.33
		B	Stop valve Chest Cover		_
		C	Engine Suspension Bracket		_
		D	Engine Suspension pin		_
		E	Arrangement of "Silentbloc" Engine Suspension		_
	16015	A	Arrangement of Cab Door with vertical winding window		10.8.33
		B/C/D/E/F/G	Cab Door with Vertical Winding window		_
	16016		Arrangement of Brake gear		11.8.33
	16017	A	Engine Suspension Cover		11.8.33
		B	Engine Suspension Distance piece		_
		C	Engine Suspension Base		_
			Engine Suspension Spherical seats		_
		F	Engine Suspension link, NOT REQUIRED		_
		G	Spring Link		_
	16018	A	Feedheater Body Joint		14.8.33
		B	Water Lifter Body joint		_
		C	Stop Valve Chest Cover joint		_
		D	Release Valve Body Joint		_
		E	Oil Strainer cover joint		_
		F	Feedheater Exhaust Branch joint		_
		G	Feedheater Bottom Cover joint		_
	16019		Arrangement of Bogie		6.8.33
	16020		Brake hanger Bracket		13.8.33
	16021		Arrangement of Steam, Brake Gear		16.8.33
	16022	A	Tailboard Hinge		15.8.33
		B	Tailboard Hinge(end)		_
		C	Tailboard Hinge bar		_
		D	Tailboard Hinge bar Plug		_
		E/F	Platform Rear Corner angle		_
		G/H	Platform Front Cover angle		_
	16023	A	Arrangement of Headboard		18.8.33
		B	Arrangement of Tailboard		_
	16024	A/B	Turn-table Side Channel		15.8.33
		C/D	Turntable Cross Channel (rear interm ote)		_
		E	Turn-table Cross channel(front)		_
		F	Turn-table Pivot channel (bottom)		_
		G/H	Turntable Pivot channel cleat (top)		_
		J	Packing Piece for Top Turntable channel		_
		K	Water tank Front foot		_
		L	Water tank Rear foot		_
	16025		Half Firegrate		15.8.33
	16026		Exhaust Ball Branch on Cylinders		16.8.33
	16027		Arrangement of Whistle		19.2.34
	16028	A	Hand Brake Lever Fulcrum		12.9.33
		B	Brake Cross Shaft bracket		_
		D	Brake Suspension Link bracket		_
		E	Brake Cross Shaft bracket		_
	16029	A	Leading Axle(special)		16.8.33
		B	Trailing axle (special)		_
	16030	A	Exhaust Ball cap
		B	Exhaust Branch ball		_
		C	Exhaust Ball Joint Spring		_
		E	Exhaust Pipe flange		_
		F	Exhaust Pipe elbow		_
	16031		Drawbar		17.8.33
	16032		Front Hub		18.8.33
	16033	A/L	Stop Valve Falnge		17.8.33
		B/P	Steam Stand Flange(to boiler)		_
		C/M	Exhaust Pipe flange		_
		D	Exhaust Pipe Flange Adaptor		_
		E	Blow Down Valve Pipe flange		_
			Exahaust Pipe flange		_
		F/G	Steam Pipe flange		_
		K	Water pipe Flange to elbow		_
	16034		Arrangement of Turntable		18.8.33
	16035	A	Bogie Side plate		18.8.33
		B/F	Bogie Headstock Plate (outer)		_
		C	Bogie Headstock Plate (inner)		_
		D	Hornstay Plate		_
		E	Bogie Pivot plate		_
	16036	A	Arrangement of Oil Pump Inlet valve		30.7.45
		B	Inlet Valve		_
		C	Inlet Valve seat		_
		D	Inlet Valve cage		_
		E	Tappet Roller		_
		F	Tappet Pin		_
		G	Cam		_
		H	Valve		_
	16037
	16038		Detail of Frame for Standard 20'-0' platform DG6		21.8.33
	16039		Crankcase
	16040		Arrangement of Underframe and Bogie Bolsters		18.8.33
	16041	A	Bogie Pivot Centre (top)		21.8.33
		B	Bogie Pivot Centre (bottom)		_
		C	Bogie Pivot Pin		_
		D	Cotter for Bogie Pivot pin		_
		E/H	Coupling Nipple for Lub. Oil Clip		_
		F/G	Hornblock Liner		_
	16042
	16043	A/F	Steam Brake Link		21.8.33
		B/L	Steam Brake Link Tie-bar		_
		C	Steam Brake Link Guide		_
		D/K	Brake and Reversing Lever Spring pawl		_
		E	Control Box Shield		_
		G	Arrangement of Steam Brake Link		_
		H	Piston Scraper ring		_
		J	Feed Pump Crosshead Scraper ring		_
	16044		Arrangement of Frame		22.8.33
	16045	A	Brake Hanger		19.8.33
		B	Brake Cross Beam (outer axle)		_
		C	Brake Cross Beam (inter m axle)		_
		D	Brake Cross Beam (inner axle)		_
	16046	A	Arrangement of tyre carrier		22.8.33
		B	Tyre carrier Stay		_
		C	Tyre Carrier base		_
		D	Brake Coupling link		_
		E	Tray Stiffener		_
	16047	A	Hand Brake Bell Crank Lever		23.8.33
		B	Hand brake Cross Shaft Bracket		_
		C	Hand Brake Operating Handle		_
		D	Brake Column Pull Rod		_
		E	Hand brake Bell Crank Lever pin		_
	16048	A/B	Sand Box (inner)		27.9.33
		C/D	Sand Box (outer)		_
	16049	A	Hand Brake Equalising link		23.8.33
		B	Hand Brake Connecting link		_
		C	Hand Brake Suspension Link		_
		D	Hand Brake Connecting Lever		_
		E	Hand Brake Pull Rod		_
			Hand Brake Pull rod		_
	16050	A	Frame for Tank Waggon		23.8.33
		B/C	Cleat No.1		_
		D	Cleat no.2		_
		E	Cleat no.3		_
		F	Cleat no.4		_
	16051
	16052		Arrangement of Piping - Tank End		25.8.33
	16053	A	Pawl Rod end		24.8.33
		B	Pawl Rod		_
		C	Steam Brake Conn rod		_
		D	Engine Suspension Bracket		_
		E	Thermo Feed Valve bracket		_
		F	Thermo Feed Valve bracket		_
		G	1/2" to 1 1/4" Adaptor		_
	16054		Connecting Rod (sanding gear)		28.9.33
			Lever (sanding gear)		_
		G	Cross Shaft (sanding gear)		_
		E	Bellcrank Lever		_
		F	Cross Shaft Lever		_
		H	Connecting Rod (sanding gear)		_
		J	Sand Pipe (inner)		_
	16055	A/B	Side Channel Truss, CANCELLED		25.8.33
			Strut for Truss, NEVER USED		_
		C	Packing Piece, CANCELLED NEVER USED		_
		D	Packing Piece CANCELLED NEVER USED		_
		E	Brake Cylinder Bracket		_
		F	Wood Block (brake rope guide)		_
		G	Pulley Bracket (brake)		_
	16056	A	Hand Brake Cross Shaft Arm		24.5.33
		B	Hand brake Pull Rod		_
		D	Hand Brake Intermediate Cross beam		_
		C	Pull Rod Turnbuckle		_
		E/F	Hand Brake Pull Rod		_
		G	Water Pipe flange		_
	16057		Propose Silent Bloc. Engine suspension		24.8.33
	16058	A	Bell Crank Bracket (throttle)		30.11.33
		B	Throttle Valve Drain Fitting		_
		C	Sand Pipe (outer)		_
		D	Bell crank Lever		_
		E	Diaphragm Support bracket		_
		F	Bracket Suspension Plate		_
	16059	A	Hand brake Screw		25.8.33
		B	Hand brake Screw nut		_
		C/D	Brake Shaft		_
		E	Hand Brake Column Ball Race Housing		_
		F	Brake Shaft Arm		_
		G	Brake Shaft Arm (to cyl)		_
	16060	A	Diaphragm Spindle Jaw		28.8.33
			Diaphragm Return Spring washer		_
		F/K	Sanding Diaphragm Lever		_
		G	Diaphragm packing piece		_
		D/L	Sand pipe flange		_
		E	Diaphragm Return Spring		_
		H	Special Nut (sanding diaphragm)		_
		J	Connecting Link		_
	16061	A	Exhaust Tee Branch LHS		24.9.33
		B/D	Elbow		_
		C/E	Elbow		_
	16062		Feed Pump Check Valve Deflector		28.8.33
	16063		Rear Mudguard		28.8.33
			Front Mudguard		_
	16064		Front Bogie Suspension bracket		28.8.33
	16065	A	Steam Ball Joint socket		28.8.33
		B	Flange for Steam Ball Connection		_
		C	Steam Ball Connection, CANCELLED		_
		E	Pipe for Steam Ball Connection		_
		D	Steam Ball Flange to Cylinder		_
	16066	A	Tank Outlet Valve		30.8.33
		B	Outlet Valve body		_
		C	Outlet Valve		_
		D	Outlet Valve handle		_
		E	Outlet Valve ring		_
		F	Outlet Valve stud		_
	16067	A	Suspension Support plate		30.8.33
		B	Lower Spring Locating plate		_
		C/J	Suspension Spring Bottom plate		_
		D/K	Suspension Spring Top plate		_
		E	Upper Spring Locating Plate		_
		F	Rubber Spring (lower)		_
		G	Rubber Spring (upper)		_
		H	Arrangement of Engine suspension		_
	16068	A	Exhaust Three-way piece		30.8.33
		B	Exhaust Ball Joint Arrangement		_
	16069	A	Brake Pull Rod (outer axle)		31.8.33
		B	Brake Pull Rod(intermediate)		_
		C	Brake Pull Rod (inner axle)		_
		D	Brake Adjusting Pull Rod		_
	16070	A/D	Front Spring Pad and Cap		31.8.33
		B	Spring Pad cover		_
		C	Front Bogie Stop plate		_
	16071	A	Brake Compensating Plate (front)		31.8.33
		B	Brake Compensating Plate (inter)		_
		C	Brake Pull Rod link		_
		D	Brake Pull Rod Adjusting Nut		_
		E	Piston Rod		_
		F	Pin in Brake Pull Rod Links		_
		G	Pin in Brake Pull Rod Links		_
		M	Bush		_
	16072		Left and Right Half Feedheater Body		6.10.33
	16073		Arrangement and Deatil of Spare Wheel box		31.8.33
	16074	A/B	Rear Wheel Hub Bush		31.8.33
		C	Rear Axle Extension		_
		D	Rear Axle (reconditioned)		_
		E/F/G	Arrangement and Detail of Drilling in Rear Mudguards		_
	16075	A/B/J	Steam Ball Suspension link		31.8.33
		C/G	Steam Ball Suspension link		_
		D	Suspension Link bracket (steam)		_
		E/K	Suspension Link bracket (steam)		_
			Suspension Link pin(steam)		_
		H	Suspension Link Fulcrum (steam)		_
	16076	A	Arrangement of Canopy Sliding Door		1.9.33
		B	Canopy Roff Sliding Door rail		_
		C	Rear Wheel Hub Rush Distance piece		_
	16077	A	Arrangement of Side Trays		1.9.33
		B	Arrangement of Side trays and Toolbox		_
	16078	A	Exhaust Pipe Adaptor Tee Piece Under platform		19.9.33
		B	Water Inlet Seating (rear tank)		_
		C	Tank Drain Seating		_
		D/J	Main Stop Valve Flange		_
		E	Suction Plug Cock facing		_
		F	Filter Body Facing		_
		G	Soot Blower Cock flange		_
		H/K	Overflow pipe flange		_
	16079	A	Hand Brake Shaft Bracket		2.9.33
		B	Injector Bracket		_
		C	Stop Valve Handle		_
	16080		Arrangement and Detail for DG4P 17" - 0" Flat platform waggon		2.9.33
	16081	A	Carrier for Steam Ball on 1st Engine		1.12.33
		B	Carrier for Steam Ball on 2nd Engine		_
		C	Carrier for Steam Ball on 5th Engine		_
		D	Carrier for Steam Ball on 6th engine		_
		E	Carrier for Steam Ball on 3rd and 4th engine		_
		F	Steam Ball Bracket		_
	16082		Arrangement of Jockey Sprocket		4.9.33
	16083	A/B	Jockey Sprocket Bracket		4.9.33
		C	Jockey Sprocket		_
		D	Dust Shield		_
		E	Jockey Sprocket Bracket stay		_
		F	Boiler cleading Stud		_
		G	Cleading Stud Extension		_
		H/J	Cleading Stud Extension		_
	16084	A	1/2" - 1/2" - 1/2" - 1/2" Four Way piece		4.9.33
		B	Elbow (in engine sump for oil dipper)		_
		C	1/2" - 1/2" Male Elbow		_
			BSP Plug		_
		E/K	3/4" BSP Four Way Piece		_
		F	3/4" - 3/4" - 3/4" Male tee piece		_
		G	3/4" - 3/4" - 3/4" - 3/4" Four Way Piece		_
		J	1/2" BSP Tee Piece		_
	16085	A	Gusset Plate (buffer beam)		4.9.33
		B	Suspension Beam (headstock engine)		_
		C	Suspension Beam (headstock engine)		_
		D	Top Gusset Plate (headstock end)		_
		E/F	Engine Suspension Beam angle		_
		G/H	Gusset Support angle		_
		L	Engine Stay		_
		J/K	Gusset Plate (headstock bot)		_
	16086	A/B	Bogie Frame		5.9.33
		C	Bogie Buffer Beam		_
		D	Bogie Headstock		_
	16087	A	Buffer Beam Stiffening angle		6.9.33
		B	Gusset Angle, Bogie Buffer Beam end		_
		C	Gusset Angle (headstock)		_
		D	Angle for Brake Bracket gusset (headstock end)		_
		E	Gusset Angle, Headstock		_
		F/G	Angle for Mid. Engine Suspension beam		_
		H/J	Angle for brake Bracket gusset		_
		K/L	Angle Cleat, Engine, Suspension, beam(headstock end)		_
	16088	A/B	Angle for Bogie main Frame		7.9.33
		C/D	Angle for Bogie Frame		_
		E/F	Corner angle (headstock end)		_
		G/H	Corner angle (buffer beam end)		_
	16089	A	Brake Shaft Bush		5.9.33
		B	Hand Brake Column alteration		_
		C	Brake Shaft Alteration		_
		D	Brake lever		_
		E	Water level Gauge Guide boss		_
		F	Water level Gauge guide boss		_
	16090	A/B	Exhaust Suspension Bracket		5.9.33
			Blast Control Rod bracket		_
		D/E/F	*text missing* suspenison link		_
		G	Blow Down Cock Rod bracket		_
	16091	A	Arrangement of Control Box		18.10.33
		B	Arrangement of Reversing Shaft End Bearing		_
		C	Arrangement of Engine Reverse Shaft End bearing		_
	16092		Stop Valve body		5.9.33
		C	Arrangement of Stop Valve		_
	16093		Exhaust Pipe Manifold		27.4.34
	16094	A/E	Exhaust Pipe Y Piece		6.9.33
		B	Exhaust Pipe Slip Joint Housing		_
		C	Exhaust Pipe ball joint seat cap		_
		D	Exhaust Pipe ball joint seat		_
	16095	A	Control Box LH		17.10.33
		B	Reversing Shaft Bracket - inner		_
		C/D	Reversing Shaft Bracket - outer		_
	16096		Arrangement of Controls		6.7.33
	16097	A	Suspension Beam (mid-engine)		6.9.33
		B	Suspension Beam (mid-engine)		_
		C	Tie Bar		_
		D	Felt Ring Cover plate		_
			Derailing Beam		_
		G	Oil Box Bracket		_
		H	Stiffening Strip for Weir Pump stays		_
	16098	A	Top Steering Lever - short		7.9.33
		B	Top Steering Lever - long		_
	16099	A	Steering Drop Lever		8.9.33
		B	Steering Gear Ball		_
		C	Pivot pin		_
		D	Pivot Pin Bush		_
		F	Drilling in Kirkstall axle		_
	16100		Arrangement of Engine Suspension brackets		24.3.33
	16101		Engine Suspension bracket		15.12.33
	16102	A	Exhaust Pipe Slip Joint ball		7.9.33
		B	Exhaust Pipe Slip Piece		_
		C	Exhaust Pipe Joint Ball		_
		D/H	Exhaust Pipe flange (small)		_
		E	Exhaust Piece		_
		F/J	Exhaust Pipe Flange (large)		_
	16103	A	Self-Aligning Bearing housing		20.10.33
		B	Bearing Spindle (outer)		_
		C	Bearing Spindle (inner)		_
		D	Bearing Distance Piece		_
		E	Special Distance piece		_
		F	Reversing Shaft Coupling flange		_
			Bellcrank Lever (*text missing*)		_
	16104		Painting Diagram		8.9.33
	16105		Arrangement of Hinged Gangway Plate		31.8.33
	16106	A	Bissel Truck Check Spring end bracket		8.9.33
		B	Check Spring Rod button		_
		C	Bissel Truck Pivot Pin		_
		D	Bissel Truck Pivot Pin nut		_
		E	Pneumatic Sand Ejector		_
		F	Bissel Truck Horn stay		_
	16107		Hardy Spicer Shaft		8.11.33
			Hardy Spicer Shaft		_
			Hardy Spicer Shaft		_
	16108
	16109
	16110	A	Control Box (RH)		19.10.33
		B	Bracket Front Cover (outer)		_
		C	Bracket Rear Cover (inner)		_
		D/F/H	Bracket Front Cover (inner)		_
		E/G	Control Box Bottom Cover		_
	16111	A	Solebar		23.10.33
		B	Solebar		_
	16112	A	Frame Font Cross member		12.9.33
		B	Front Drawbar Bracket		_
		C	Dashboard Instrument cover		_
	16113	A	Exhaust Branch		12.9.33
		B	no description given, SD waggon		_
		C	Feedheater Facing		_
		D	Spark Box clip		_
	16114
	16115	A	Mudguard Rear Support RH		18.9.33
		B/G	Mudguard Rear Support		_
		C/D	Mudguard Front support		_
		E/F	Mudguard Centre support		_
		H	Cross Channel Cleat		_
		J	Mudguard Centre Bracket		_
		K/L	Tyre Carrier Stay		_
		M/N	Spring Bracket Distance piece		_
	16116		Arrangement of Tyre carrier		14.9.33
	16117		Proposed Arrangement of Boiler Compartment
	16118	A	Crosshead Chamber Drain Pipe		139.33
			Crosshead Chamber Drain Pipe		_
		D	Crosshead Chamber Drain pipe		_
			Crosshead Chamber Drain Pipe		_
	16119	A	Lamp Bracket (rear)		13.9.33
		B	Lamp Bracket Plate		_
		C	Front Lamp Bracket Stiffening strip		_
		D	Front Lamp Carrier Bracket		_
		E	Covering Strip (rear end)		_
		F	Wood Seating for Head lamp		_
	16120	A	Cross Chain Dog		13.9.33
		B/C	Arrangement of Cross chain		_
		D	Cab Back Rain Trough		_
		E/F	Body Side Stiffening angle		_
	16121		Arrangement and Detail of cab		13.9.33
	16122	A/B	Cab Side Coping		14.9.33
		C	Cab and Tank Support angle		_
		D	Tank Bearer		_
		E	Seat Support with Tool Drawers		_
		F	Seat Support with Accum lr Box		_
	16123		Arrangement and Detail of cab Back cover		13.9.33
	16124	A	RH Water Tank		13.9.33
		E	LH Water Tank		_
	16125
	16126		Oiling and Greasing diagram
	16127	A	Axle End Thrust Cap for Mech Lubricator		14.9.33
		B	Axle Box Cover (outside)		_
		C	Axle Thrust Cap locking plate		_
		E	Exhaust Tee Support		_
		F	Plate Support for Exh. Pipe Elbow		_
		G	Lug Support for Exh Pipe Elbow		_
		H	Tank Suction pipe		_
	16128	A	Cross Shaft Vac. Brake Gear		12.9.33
		B	Brake Column Cross Shaft		_
		C/F	Cross Shaft Bearing Bracket		_
		D	Cross Shaft lever (small)		_
		E	Cross Shaft Lever (large)		_
	16129	A	Brake Lever (bogie)		9.9.33
		B	Brake Lever (bogie)		_
		C	Brake Lever bracket		_
		D	Brake Beam Rod end		_
		E	Brake Rod Safety Bar		_
	16130	A	Brake Shaft Hanger (outside)		1.9.33
		B	Brake Shaft Hanger (inside)		_
		C	Brake Cylinder hanger (outside)		_
		D	Brake Cylinder - hanger (inside)		_
		E	Brake Block hanger		_
		F	Brake Block Hanger bracket		_
	16131	A	Brake Block beam		8.9.33
		B	Brake beam		_
		C	Brake Beam Support bracket		_
		D	Brake beam Guide bar		_
		E	Brake beam Bracket Packing piece		_
		F	Brake Rod Safety link		_
	16132	A	Hand Brake Pull rod		14.9.33
		B	Hand Brake Pull rod		_
		C	Hand Brake Column Pull links		_
		D	Hand Brake Screw		_
	16133	A	Cylinder Pull Rod Lever		11.9.33
		B	Cross Shaft Hand Brake Lever		_
		C/D	Cross Shaft Main Brake Lever		_
		E	Cross Shaft Vac. Brake Gear		_
	16134	A	Brake Rod (light axle)		13.9.33
		B	Brake Rod (heavy axle)		_
		C	Brake Rod		_
		D/E	Main Brake Pull rod		_
	16135		19"-0" x 7"-0 3/4" Flat platform		15.9.33
	16136	A	No.6 Injector		8.7.32
		B	No.6 Injector SA Fig 2		_
	16136 2nd		Arrangement of No.6 Injector
	16137		Alteration to Boiler 15642		15.9.33
	16138		no description given, SD4 and 6 short tippers		15.9.33
		E/F	Front Mudguard Front Support		_
			Arrangement of Front Mudguards		_
	16139		Arrangement and Detail of Apron plate		16.9.33
	16140		Arrangement of Reversing rods		20.12.33
	16141		Special 11/16" Fitted bolt		16.9.33
			Special Fitted bolt		_
			Special Fitted bolt		_
			Special Bolt		_
			Special Fitted bolt		_
			Special fitted bolt		_
			Special Set Screw		_
			Special Fitted bolt		_
	16142	A	Studding of Top Flange		20.9.33
		B	Studding of Bottom flange		_
		C	Studding of Top flange		_
		D	Studding of bottom flange		_
	16143	B	Steam Brake Valve bush		7.10.33
		C	Brake Valve Spindle		_
		D	Brake Valve Spindle cap		_
		E	Brake valve Spindle gland		_
	16144	A	18" - 0" x 7" - 0 3/4" Flat platform		16.9.33
		B	20"-0" x 7"-0 3/4" Flat platform		_
	16145	A	Tipping Cylinder		26.9.33
		B/C	Tipping Cylinder Bracket		_
	16146		Brake Block		18.9.33
	16147		Footboard		18.9.33
	16148	A	14"-0" x 7"-0 3/4" Flat platform		18.9.33
		B	Arrangement of 13"-6" x 7" - 0 3/4" Flat platform		_
	16149	A	Ashpan		18.9.33
		B	Ashpan Lifting handle		_
		C	Front bogie Stop plate		_
	16150	A	Pipe Clip(steam to tip cyl)		18.9.33
		B	Pipe clip(steam to tip cyl)		_
		C	Toolbox Support(front)		_
		D	Toolbox Support(rear)		_
	16151	A	Driver's Foot Rest		18.9.33
		B	Apron Plate Packing - RH		_
		C	Apron Plate packing - LH		_
		D/E	Rear Mudguard Diagonal stay		_
	16152	A	In Let Superheater Coil Lagging cover		24.6.37
		B	Outlet Superheater Coil Lagging cover		_
		C	Stop Valve Chest shield		_
		D	Stop Valve Chest Shield cover		_
	16153	A	Tank Rear Support		21.9.33
		B	Boiler and Tank Front Support		_
	16154	A/B	Cab Support Channel		22.9.33
		C/D	Tank Rear Support Channel cleat		_
		E/F	Boiler and Tank Front Support cleat		_
		G	Cab Support Channel bracket		_
		H	Steering Case cleat		_
	16155	A	Frame Front Cross Member		22.9.33
		B	Accellerator Bracket cleat		_
	16156	A	Arrangement of Rear Mudguard		19.9.33
		B/C	Rear Mudguard Stay		_
		D/E	Rear Mudguard Support		_
		H	Guard Rail Cleat Doubling plate		_
		F	Guard Rail Stay		_
		G	Guard Rail cleat		_
	16157	A	Platform Support		16.9.33
		B	Plate Support for (16068A)		_
		C	Bracket to carry-Injector		_
		D	Bracket (ex ball support)		_
		E	Plate Support for Exhaust ball		_
		G	Packing Piece(for bracket drg no. 16028)		_
	16158		Spring Hanger pin		19.9.33
			Grub Screw		_
			Spring Eye		_
			Spring Eye Pin collar		_
		D/K	Spring Link		_
		H	Rubbing Strip (pivot centre)		_
		J	Sand Pipe Adapter		_
	16159	A	Dust Cover
		B	Dust Cover Shroud		_
		C	Shim		_
		G	Suspension Ball Cover		_
		D	Dust Cover Spring Stop		_
		E	Spring for Ball Joint Dust cover		_
			Suspension Link		_
	16160	A/B	Cab Side Plate Angle to Platform(rear)		3.10.33
		D	Cab Side Plate Angle to Platform(front)		_
		E/F	Cab Side Plate angle to door angle		_
		G	Cab Side Filling Up Plate and Angle under door		_
		H/J	Cab Side Plate, Vertical angle (front)		_
		K/L	Cab Side Plate, Vertical angle (back)		_
		M/N	Cab Side Plate angle to roof		_
	16161		Special Faced nut		18.9.33
			Special Lock Nut		_
		D	Special Adaptor		_
		E	Special Adaptor		_
			Special Nut for Engine Suspension		_
		F	Special Adaptor		_
		J	Adaptor(air brake to cylinder)		_
		K	Adaptor		_
	16162	A	Engine safety Stay		13.9.33
			Val Train Pipe clip		_
		J	Vacuum Pipe bracket		_
		K	Vacuum Pipe bracket clip		_
		L	Vacuum Pipe bracket		_
		M	Vacuum Pipe bracket clip		_
		N	Vacuum Pipe bracket		_
	16163		Arrangement and detail of cab (mech stoking)		20.9.33
	16164	A	Rear Tarpaulin Rail support		20.9.33
			Tailboard Centre stanchion		_
		D	Tailboard Plate		_
		B	Tarpaulin Rail bracket		_
		C	Headboard Protection plate		_
		E	Front Tarpaulin Rail support		_
	16165	A/B	Front Corner plate		20.9.33
		C/D	Front End Cross Bearer bracket		_
		E/F	Front Cross Bearer		_
		G/H	End Cross Bearer Support bracket		_
		J/K	Platform Front Corner plate		_
		L/M	End Cross Bearer gusset		_
	16166	A	Arrangement of Front Mudguard		21.9.33
		B	Mud Flap		_
		C	Mud Flap Plate		_
		D	Mudguard Stiffening plate		_
		E	Front Mudguard Support bracket		_
		F	Number Plate support		_
		G	Platform Strengthening angle		_
	16167	A	Headboard Bottom angle		21.9.33
		B/C	Tailboard End protection plate		_
		D/E	Platform Front Corner angle		_
		F/G	Platform Rear Corner angle		_
		J/K	Snubber Chain bracket		_
		H	Catch Bracket(tailboard)		_
		L	Tailboard Stop angle		_
	16168	A/B	Rear Corner angle		21.9.33
		C/D	Front Corner angle		_
		E	Side Extension angle		_
		F/G	Headboard side angle		_
		H	Side Extensiom Support channel		_
		J	Cross Tie Eyebolt		_
		K/L	Cross tie		_
	16169
	16170	A/G	Top Angle to Bogie Crossbar plate		18.9.33
		B	Bottom Angle to Bogie Crossbar plate		_
		C	Gusset to Bogie Crosshead plates		_
		D/E	Bogie Side plate top angle		_
		F	Bogie Corner gusset		_
	16171	A	Bogie Headstock Plate (inner)		19.9.33
		B	Bogie Headstock Plate (outer)		_
		C	Bogie Inner headstock plate, top angle		_
		D	Bogie Outer Headstock Plate, top angle		_
	16172	A	Bogie Inner Headstock plate, bottom angle		20.9.33
		B	Bogie Outer Headstock plate, bottom angle		_
		C/D	Bogie Side plate and Headstock cleat		_
		E/F	Bogie Side plate, bottom angle		_
	16173	A	Bottom Side Friction plate		21.9.33
		B/G	Engine Suspension crossbar		_
		D	Cleat to Engine Suspension crossbars		_
		C/F	Engine Suspension Crossbar		_
		E	Packing Plate to Side Plate and Crossbar Cleats		_
		H	Pivot Pin Bottom plate		_
	16174		Arrangement of Throttle valve		10.2.34
	16175		Arrangement of Variable Blast Control .ETC		23.9.33
	16176	A	Arrangement of rear Mudguards		25.9.33
		B	Front Mudguard Rear Support Bracket		_
		C	Front Mudguard Rear Support		_
		D/G	Rear Mudguard Packing piece		_
		E/H	Rear Mudguard Support		_
		F	Brake Cylinder Pull Rod guide		_
	16177		Arrangement of Bogie Engine and Gear Box		20.10.33
	16178	A	Tailboard Bottom angle		22.9.33
		B	Tailboard Cope bar		_
			Tarpaulin rail		_
		F	Hinge Bar End		_
		D	Body Side Top Stiffener		_
	16179	A	Arrangement of headboard		22.9.33
		B	Headboard Outside Cope bar		_
		C	Headboard Inside centre Cope bar		_
		D/E	Headboard Support		_
		F	Headboard Outside centre cope bar		_
	16180
	16181
	16182
	16183
	16184		Body Frame details		26.9.33
	16185		Arrangement showing Clearance for Ash pit deflectors		23.9.33
	16186		Arrangement and Deatil of Bunker		23.9.33
	16187	A	Globe valve Adaptor		13.9.33
		B/H	1/8 Gas Plug		_
		C	Cap for Flexible Conduct		_
		D	1/2" to 3/4" Coupling nipple		_
		E	Cab Back Top cover		_
		F	Cab Back Bottom Cover		_
		G	Cab Back Cover		_
	16188	A/H	Variable Blast Cross Shaft		25.9.33
		B	Variable Blast Cross Shaft bracket		_
		C	Varibale Blast Control Rod		_
		D/E	Blow Down Valve Extension spindle		_
		F	Sand gear Vac. Res. Strap end		_
		G	Sand gear Vac. Res. Strap angle		_
	16189	A	Bunker front angle		25.9.33
		B	Bunker Throat flange		_
		C	Canopy Stiffening strip(RH)		_
		D	Canopy Stiffening strip(LH)		_
		E	Relief Valve Safety Plate		_
	16190	A	Body Capacity plate		23.9.33
		B	Body Capacity plate		_
		C/D	Mudguard Protection Matting		_
		E	Arrangement and Detail of Drilling in Headboard for body Capacity plate		_
		F	Arrangement and Detail of Drilling in Headboard for body Capacity plate		_
	16191	A	Water Pipe Elbow, under platform, NOT USED		25.9.33
		B	Elbow for Hind Tank, NOT USED		_
		C	Elbow for Front Tank(water)		_
		D	Lower Engine Suspension ball seat		_
		E	Upper Engine Suspension ball seat		_
	16192	A	Alteration to Rear End of platform		25.9.33
		B/C	Rear Buffer		_
		D	Extra Drilling in Rear Cross Member		_
	16193	A/B	Body Frame Drilling		15.9.33
		C/D	Stiffening Angle drilling		_
		E/F	Stiffening Angle drilling		_
	16194		Body Frame platform		20.9.33
	16195	A	Cab Door Hand Pillar		25.9.33
		B/C	Cab Beading		_
		E/F	Coal Bunker Beading(side)		_
		D	Coal Bunker Beading(back)		_
		G	Cab Door beading		_
	16196		Oiling and Greasing Diagram		22.9.23
	16197	A	Tipping Cylinder Bottom Cover		26.9.33
		B	Piston Rod(top half)		_
		C/D	Tipping Side Hinge bracket		_
	16198	A to E	Ashpan		26.9.33
		F/G	Damper Guide		_
		H	Superheater Coil Stay Collar		_
		J/K	Ashpan Surge Plate		_
	16199	A/B	Trailer Side Channel		26.9.33
		C/D	Side Channel truss		_
		E	Turntable Front Cross channel		_
	16200	A	Arrangement of Front Mudguard		25.9.33
		B/C	Front Mudguard Rear Stay		_
		D/H	Front Mudguard Front stay		_
		E	Arrangement of Rear Mudguard		_
		F	Front Mudguard Top stay		_
		G	Rear Mudguard Top stay		_
	16201	A	Tipping Piston		26.9.33
		B/D/E	Tipping Piston Rod		_
		C	Brake Shoe Wearing plate		_
	16202		Arrangement of Sanding Gear		3.12.33
	16203	A/B	Bunker Chute cleat		26.9.33
		C	Bunker Door Guide packer		_
		D	Bunker Door Guide packer		_
		F	Bunker Door Guide		_
		E	Bunker Door guide		_
		G	Bunker Door		_
		H/J	Canopy Roof Stiffening plate		_
		K	Floor End Protection angle		_
	16204		Bunker Chute		26.9.33
	16205		Oiling and Greasing diagram		21.9.33
	16206	A	Footplate Stiffening angle		26.9.33
		B	Footplate Stiffening angle		_
		C/D	Bodywork Support angle		_
		E	Angle Cab Back to Footplate		_
		F	Footplate Stiffening angle		_
		G	Footplate Stiffening angle (rear tank)		_
	16207	A	Arrangement of Frame Truss		27.9.33
		B/C	Side channel Truss		_
		D/E	Frame Truss Strut		_
		F	Trailer Hand Brake Pack		_
		G/H	Rear Mudguard Rear Stay		_
		K/L	Rear Mudguard Front stay		_
	16208	A	Cab Back Opening cover		27.9.33
		B	Tipping Cylinder Bottom Cover		_
		C	Tipping Cylinder Bottom Cover		_
	16209		Arrangement of Guard Rails		27.9.33
	16210	A	Dust Tray		27.9.33
		B	Bolt Keep		_
		C	Tray Front Support		_
		D	Tray Rear Support		_
		E	Trap Door (lined)		_
		F	17"-0" platform		_
	16211		Arrangement of Wheel and Axles		28.9.33
	16212		Arrangement and Detail of frame
	16213	A	Rear Cross Member		3.10.33
		C/H/K	Tipping Cylinder Cross Channel (rear)		_
		G/J	Tipping Cylinder Cross Channel (front)		_
		D/E	Rear Cross Member cleat		_
		F	Tipping Cylinder Cross channel stiffener		_
	16214		Oiling and Greasing diagram		27.9.33
	16215	A	Tyre Hoist Spur Wheel		28.9.33
		B	Tyre Hoist Bearing		_
		C	Tyre Hoist Handle		_
		D	Tyre Hoist Gear Bracket		_
	16216		Tipping Cylinder bracket		29.9.33
	16217		Axle (metre gauge)		29.9.33
	16218	A	Tyre Hoist Bracket		29.9.33
		B	Spur Gear Shaft		_
		C	Pinion		_
		D	Tyre Hoist worm spindle		_
		E	Pinion washer		_
		F	Tyre Hoist Protection tube		_
	16219		Aux. Water Tank		29.9.33
	16220	A	Rear Numer plate		16.10.33
		B	Number Plate support		_
		C	Speedometer Geneator bracket		_
		D	Jockey Sprocket Bracket		_
		E	Tyre Hoist Cover(inside)		_
	16221	A to H	Cab Side Panel Assembly
		J to M	Cab Front Panel Assembly		_
	16222	A	Boiler Shell		29.9.33
		B	Studding in Boiler Top Joint		_
		C	Studding in Boiler bottom Joint		_
	16223	A	Boiler Rear Foot		3.10.33
		B/C	Boiler Side foot		_
		D/E	Boiler side foot, NOT USED		_
		F	Tipping Cylinder Bottom Cover joint		_
		G	Tipping Cylinder Bottom Cover joint		_
	16224		Arrangement of Driving Wheels and Axle		30.9.33
	16225		30" Dia Solid Wheel		30.9.33
	16226		Arrangement and Detail of 3 way tipping platform		2.10.33
	16227		Arrangement of Steam and Exhaust pipes		2.10.33
	16228
	16229	A	Alteration to Rear End of Frame		2.10.33
		B/C	Arrangement of Tailboard		_
		D/E	Tailboard Support		_
		F	Tailboard Washer plate		_
	16230	A/B	Arrangement of Front and rear Number Plate		2.10.33
		C	Arrangement of Rear Number plate		_
		D	Arrangement of Rear Number plate		_
	16231	A	Exhaust Pipe bracket		2.10.33
		B/J	Steam Pipe bracket		_
		C/H	Steam Pipe bracket support		_
		D	Steam Pipe Sling bracket		_
		E	Steam Pipe Sling bracket clip		_
		F	Ash Chute Door clip pin		_
		G	Ash Chute Door clutch		_
	16232	A	Bolster Gusset DE		3.10.33
		B	Headstock Plate		_
		C	Headstock Gusset TE		_
		D	Headstock Gusset DE		_
	16233	A	Solebar and Bolster Bottom gusset		21.8.33
		B/C	Cleat to Solebar and bolster bottom gusset		_
		D	Cleat to Solebar and Bolster bolster crossbar		_
		E	Cleat to Bolster Crossbar and End longitudes		_
		F	Gusset to end Longitudes and Bolster Crossbar(bottom)		_
		G/H	Cleat to End Longitude and Bolster Crossbar gusset		_
	16234	A	Bolster Spring Rocker Saddle		18.8.33
		B	Bolster Spring Cap		_
		C	Bolster Spring seat		_
		D	Bolster Spring Driving end		_
		E	Bolster Spring Trailing end		_
	16235	A	Pressed Steel Bolster		21.8.33
		B	Bolster Stiffener Plate		_
		C	NOT REQUIRED		_
		D/E	Bolster Rubbing plate		_
		F	Crossbar Rubbing plate		_
		G	Top Side Friction plate		_
	16236	A	Tyre Hoist Connecting Tube		2.10.33
		B	Cab Back Plate		_
		C	Handle Knob		_
		D	Handle Pin		_
		E/F	Tyre Strap		_
	16237	A/B	Headstock, Diagonal and Longitude Knee-trailing end		22.8.33
		C/D	Headstock, Diagonal and Longitude Knee-driving end		_
		E	Buffer Guide		_
		F	Buffer Guide plate		_
		G	Spring Follower plate		_
	16238		Pivot Bottom casting, NEVER USED		3.10.33
	16239	A	Tyre Strap Cleat		3.10.33
		D	Tyre Strap Cleat		_
		B	Arranmgement of tyre Carrier Boards and Packing pieces		_
		C	Cab and Dunker Drilling arrangement		_
	16240
	16241	A	Exhaust Ball for Hind bogie		3.10.33
		B	Flange (pump connection to main steam valve)		_
		C	Delivery Bend		_
		D	Steam Flange (male)		_
		E	Steam Flange (female)		_
	16242	A	Arrangement of Headboard		4.10.33
		B	Headboard Inside Centre Cope Bar		_
		C	Headboard Outside Centre Cope bar		_
		D/E	Headboard Support		_
		F	Headboard Outside Cope bar		_
		G	Headboard Bottom angle, NEVER USED		_
		H	Tailboard Bottom angle		_
	16243	A	Rear Number Plate Support		4.10.33
		B	Lamp Bracket		_
		C	Trailer Number Plate support		_
		E/F	Tailboard Hinge bracket		_
		D	Body Side Stiffening angle		_
		G	Side rail Support Angle		_
		H	Headboard Bottom angle		_
	16244	A/B	Funnel Top Surround		10.10.33
		C	Arrangement and Detail of Canopy roof		_
	16245	A/B	Bunker Side Plate angle and Back plate		6.10.33
		C/D	Bunker Side Plate angle to platform		_
		E/F	Sand Box support to bunker Side plate angle		_
		G/H	Bunker Side Plate angle to cab(back)		_
		J/K	Bunker Side Plate Stiffening Angle		_
		L/M	Bunker Side plate Angle		_
	16246		Arrangement of Brake gear		11.10.33
	16247	A/F	Brake Hanger Bracket		9.10.33
		B	Reversing and Brake Hanger Bracket RH		_
		C	Brake Hanger Bracket LH		_
		E	Front Apron Plate angle		_
		G	End Fitting for Supr Side headers		_
		D	Front Footplate		_
	16248	A	Brake Drum		5.10.33
		B	Brake Shoe		_
	16249	A	Vacuum Pipe Bracket (sand gear)		6.10.33
		B	Vacuum Pipe Bracket clip, NEVER USED		_
		C	Handle Nut (accumulator box door)		_
		D	Accumulator Box Strap end		_
		E	Accumulator Box Strap		_
		F/G	Accumulator Box Strap		_
		H	Accumulator Box Support CH		_