15750	A	Swing Link bracket	30.5.33
	B	Bevel Gear Box Cover bush	_
	C	Bevel Gear Spindle	_
	D	Coupling Pin Guide	_
	E	Coupling Pin	_
	F	Coupling Pin Cap	_
	G	Throttle Layshaft	_
15751		Dashboard, Windscreen Support and Canopy Front Filling	31.5.33
15752		Footboard, SD waggon	4.7.33
15753		Proposed Arrangement of SD8 fitted with hopper body	31.5.33
15754
15755	A/C	Auxiliary Valve chest	31.5.33
	B	Safety Valve body	_
15756		Arrangement and Detail of Rear Mudguard (rear half)	31.5.33
		Arrangement and Detail of Rear Mudguard (front half)	_
	J	Rear Mudguard Cross stay	_
	K/L/S/T	Rear Mudguard Rear stay	_
	M/N	Rear Mudguard Top Stay	_
	P/R	Rear Mudguard Front bracket	_
15757		Arrangement of Rear Mudguards, SD waggon	26.6.33
15758	A	Footstep for Front Mudguard	6.6.33
	B/M	Front Mudguard Front stay	_
	C/D	Front Mudguard Rear Stay	_
	E/F	Front Mudguard Front stay support	_
	G	Front Mudguard Rear Protection plate	_
	J/L	Front Mudguard Foot pad	_
	H/N	Rear Mudguard Stay	_
	K	Cylinder Lubricator bracket	_
15759	A	Funnel Top Surround	31.5.33
	B	Spark Collecting Pipe Top flange	_
	C	Coaling ladder carrying hook	_
15760	A	Steam Brake Shaft Bracket	1.6.33
	B	Steam Brake link	_
	C	Brake Cylinder cover	_
	D	Steam Brake Link guide	_
	E	Drain Valve body	_
15761	A	Buffer Spring Top Cover plate	15.3.33
	B	Buffer Spring	_
	C	Pipe clip	_
	D	Pipe clip	_
	E	Oil Cup carrier	_
	F	3/8" to 1/2" nipple	_
	G/H	Oil Pipe to Centre pivots	_
15762	A	Air Compressor Bracket	4.7.33
	B	Mudguard Top Support Bracket	_
	C/D	Guard Rail Bracket (centre)	_
	E/F	Guard Rail Bracket stay (centre)	_
	G/H	Guard Rail Bracket Stay (front)	_
15763	A	Centre Pivot Casting (upper)	1.3.33
	B	Centre Pivot Casting (lower)	_
15764	A	Bevel Gear (throttle)	6.6.33
	B	Bevel Pinion(throttle)	_
	C	Suspension Bracket (reverse)	_
	D	Engine Reverse Shaft Sprocket	_
	E	Reversing Layshaft	_
15765	A	Air Compressor Bracket bolt	6.6.33
	D	Drawbar Buffer bolt	_
		Spring Buckle bolt	_
		Spring Buckle bolt	_
	G	Layshaft Cover (end) set pin	_
	H	Pivot Pin Set pin	_
15766	A	Brake and Rev. Gear bracket	29.5.33
	B	Reversing Shaft bracket	_
15767		Bogie Arrangement
15768
15769
15770	A	Arrangement of platform Support stays	6.6.33
	B/C	Platform Support stiffener	_
	D/E	Platform Support stay	_
	F	Brake valve Rear support	_
	G	Brake Valve Front support	_
	H	Special Drilling in RH Footplate bracket	_
15771		19'0" x 7' 0 3/4" Flat platform	7.6.33
15772	A/C/D	Combined Blast and Blower Pipe	24.2.47
	B	Spark Arrester vanes	_
15773	A	Reversing Sprocket Coupling	7.6.33
	B	Layshaft Coupling	_
	C	Control Rod end	_
		Swing Link	_
	E	Throttle Swing link bracket	_
15774	A/B	Bunker Chute	7.6.33
	C	Bunker Chute Extension Plate	_
	D	Furnace Door Top plate	_
	E/F	Furnace Door Bottom plate	_
	G/H	Ashpan Hinge Pin Locking chain	_
	J	Furnace Door Top plate	_
	K	Furnace Door Bottom plate	_
	L	Arrangement of Furnace door	_
15775		Wakefields Eureka Type "G" Lubricator, geared car	26.8.33
15776		Arrangement of Rear Mudguards and Guard Rails with Drilling in Frame	7.6.33
15777		Proposed Arrangement of Articulated DG8 with grain carrying body	7.6.33
15778		Proposed Arrangement of Articulated SD 8 with grain carrying body	7.6.33
15779	A	Reversing Quadrant	7.6.33
	B	Gear Change Quadrant	_
	C	Hand Brake Quadrant	_
	D	Hand brake Pawl	_
	E	Reversing Pawl	_
	F	Gear Chanege Pawl	_
	G	Gear change Index plate	_
	H	Reversing index plate	_
15780	A	Water lever Gauge Guide	8.6.33
	B	Water level gauge guide	_
	C	Water Level Guide tube	_
	D	Water level Guage float	_
	E	Water Level Gauge guide cap	_
	F	Water level Gauge cap	_
	G	Tank Filling tube	_
	H	Tank connecting pipe	_
15781	A	Pawl Rod End	8.6.33
	B	Pawl Rod	_
	C	Pawl Rod guide	_
	D/G	Pawl Pin	_
	E/H	Hand Brake Shaft	_
	F	Reversing Spindle	_
15782		Tipping platform for Dg6T on Pneumatics	8.6.33
15783	A/B	Guard Rail Bracket stay (rear)	8.6.33
	C/D	Guard rail Bracket (rear)	_
		Rear Mudguard	_
	G/H	Headboard Side angle	_
	J/K	Platform Front corner angle	_
		Tipping Side *text missing*	_
15784	A	Brake Beam Pull Strap end	8.6.33
	B	Brake Beam Pull Strap end	_
	C	Brake Beam Pull Strap end	_
	D	Strap End plates	_
15785	A/B	Steam Brake Cylinder	9.6.33
	C/D	Steam Brake Cylinder	_
15786	A	Throttle Lever bracket	9.6.33
	B	Throtlle Direction Change lever	_
	C	Throttle Cross Rod lever	_
	D	Throttle Cross Rod Bracket	_
	E	Cross Rod end	_
	F	Reversing Indicator	_
15787	A	Brake Rod Hanger (driving end)	10.6.33
	B	Vac. And hand Brake Rod hanger	_
	C	Hand Brake Yoke Support link	_
	D	Hand brake Yoke	_
15788		Bissel Truck arrangement	14.5.33
15789	A	Throttle Lever spindle (engine end)	12.6.33
	B	Throttle Lever spindle (rear end)	_
	C	Throttle lever(control box)	_
	D	Bracket boss	_
	E	Sight Hole Plug	_
	F	Reverse Shaft End bearing Spindle	_
15790	A/B	Vac. Brake Cylinder Support bracket	12.6.33
	C	Yoke Tie Rod Stop bracket	_
	D	Hand Brake Shaft thrust bracket	_
	E	Brake Hanger bracket	_
	F	Yoke Tie rod	_
15791	A	Camshaft Spur pinion	15.6.33
	B	Camshaft Bush Pump end	_
	C	Engin Flywheel	_
	D	Camshaft Key	_
	E	Water Gauge Rod guide	_
15792		Arrangement of Control Rods in Underframe	22.6.33
15793		Torque Stay (trailing end)	13.6.33
		Torque Stay (leadling end)	_
15794		Bunker Base	24.5.33
15795	A	Ratchet Casing	25.5.33
	B	Ratchet Casing End Cover	_
	C	End Cover Gland	_
	D	Ratchet Adjusting plate	_
	E	Ratchet Pawl body	_
	F	Stoker Conveyor	_
15796	A	Stoker Conveyor spindle	29.5.33
	B	Stoker Ratchet wheel	_
	C	Ratchet Operating Lever (rear)	_
	D	Ratchet Operating Lever (front)	_
	E	Pawl Cut off Operating Lever	_
	F	Ratchet Pawl tip	_
15797	A/B	Stoker Driving rod end	31.3.33
	C	Driving Rod end bush	_
	D	Driving Rod end cover	_
	E	Driving Rod End pin	_
	F	Driving Rod end distance piece	_
	G	Ratchet Lever Distance piece	_
	H	Ratchet Lever bolt	_
15798	A	Thermofeed Control Valve Yoke	8.6.33
	B	Thermofeed Control valve elbow	_
	C	Control Valve Clutch Fork	_
	D	Control Valve Elbow Stifferening plate	_
	E	Pawl Tip locking plate	_
15799	A	Ratchet Control Operating lever	13.6.33
	B	Thermofeed Control Operating Lever	_
	C	Ratchet Control Operating shaft	_
	D	Thermofeed Control Operating shaft	_
	E	Ratchet Control Quadrant plate	_
	F/G	Control Rod	_
	H/J	Control Rod end	_
	K	Pawl Return Spring bolt	_
15800	A	Ratchet Control Quadrant	22.6.33
	B	Ratchet Control Shaft bracket	_
	C	Ratchet Control Quadrant lever	_
	D	Stoker bell Crank lever	_
	E	Stoker Bell Crank bracket	_
15801		Reversing Rod	13.6.33
	W	Brake and Rev. Gear Bracket back plate	_
	X	Rev. Gear change Rod Guide Bracket	_
		Gear Change rod	_
		Steam Brake rod - rear	_
15802	A	Bell Crank Bracket stay (inner)	27.6.33
	B	Bell Crank Bracket stay (outer)	_
	C	Bell Crank Lever pin	_
	D	Conveyor Spindle Distance piece	_
	E	RH Water Tank Top Pressing	_
	F/G	Boiler Foot (side)	_
	H	Boiler Foot (rear)	_
15803	A/B	Brake Pull Rod (hand)	13.6.33
	C/D	Brake Pull Rod (vacuum)	_
	E	Brake Pull Rod (driving Bogie End)	_
	F/G	Brake Pull Rod(bogie)	_
15804		Sanding Arrangement	13.6.33
15805	A	Outer Sandbox	31.5.33
	B	Inner Sandbox	_
	C	Sanding Valve Seat	_
	D	Sanding Diaphragm carrier	_
	E	Sanding Valve	_
15806
15807		Arrangement and *text missing*	13.6.33
15808		Steam Brake Cylinder	9.6.33
15809		Special Pins	14.6.33
		Special Bosses	_
		Special Ferrule	_
		Bevel Locking washer	_
	G	Hand Brake Screw Shaft	_
	H/L	Gear Box Bevel Shaft	_
15810	A	Arrangement of Trailer Steam Brake Gear	14.6.33
	B	Steam Brake Gear Cross support	_
	C/D	Steam Brake Cylinder Support angle	_
	E	Rear Cross Link Guide	_
15811	A	Rear Bottom cross Link	14.6.33
	B	Rear Top Cross link	_
	C	Front Link	_
15812	A	no description, for rail bus 200HP	14.6.33
	B	Engine Suspension Spring plate	_
	C	Engine Suspension Spring cap (top)	_
	D	Engine Suspension Spring cap (bottom)	_
		no details given	_
		no details given	_
		no details given	_
15813	A	Hand Brake Shaft Bracket	14.6.33
	B	Gear Box Cover	_
	C	Hand Brake Column Gear box	_
15814		Tipping Platform	15.6.33
15815
15816	A/B	Hand Brake Column base	15.6.33
	C	Column Base Bush (short)	_
	D	Column Base Cover bush	_
15817	A	Hand Brake Cross shaft gear box	16.6.33
	B/C	Brake Yoke Swivel nut	_
	D/E	Handbrake Screw	_
15818		Arrangement of Windscreen with both Windows split and hinged	16.6.33
15819	A/B	Turntable Ring - top and bottom	17.6.33
	C	Pivot Channel Centre Gusset (turntable)	_
	D/E/J/K	Front Cross Channel Gusset	_
	F	Steam Brake Cylinder Bracket, CANCELLED	_
	G	Steam Brake Cylinder bracket	_
	H	Pivot Channel Centre Gusset (main frame)	_
15820	A	Spring Buckle Bolt nut	19.8.33
	B	Hinge Bar nut	_
	C	Copper Washer for Stop Valve header	_
	D	Serrated Washer for Stop Valve header	_
	E	Jam Nut for Apron panel	_
15821		Engine Cover doors	19.6.33
15822		Tipping Cylinder, DG6T	19.6.33
15823		Bumper bracket	19.6.33
	B	Bumper bracket cap	_
	D/E	Blast nozzle	_
	G	Bumper bracket	_
15824	A/B/S/T	Platform Rear Corner angle	19.6.33
	C/D/E/F	Side End Protection plate	_
	J	Tailboard Catch Bracket	_
	K/L	Tailboard Protection plate	_
	G/H	Tailboard Hinge	_
	M/N	Side End protection plate	_
	P/U/R/V	Tailboard Catch bracket	_
15825		Bearing Spring	20.6.33
15826	A	Arrangement of Headboard 1" -8"	23.6.33
	B	End Cross Bearer gusset	_
	C/D	Headboard Support	_
	E	Headboard Outside Cope bar	_
	F	Headboard Inside Centre cope bar	_
	G	Headboard Outside Centre Cope bar	_
	H	Brake Rope guide block	_
15827	A	Volute Spring	20.6.33
	B	Joint for Exhaust Branch to cylinders	_
	C	Joint for Water Levelling pipe	_
	D	Tank Sieve (complete)	_
	E	Water Inlet Pipe joint	_
	F	Tank Strap (240 gall tank)	_
15828	A	Gear Box Bevel Shaft (crossover)	20.6.33
	B	Hand Brake Spindle	_
	C	hand Brake Column	_
	D	Hand brake Hand Crank	_
15829		Arrangement of engine	12.9.33
15830	A	Spark Collecting Box	21.6.33
	B	Funnel damper	_
15831		Arrangement of Timber Trailer	21.6.33
15832	A	Bearing Housing Suspension plate	22.6.33
	B	Gear box Suspension plate	_
15833	A	Brake beam Pull Strap End	22.6.33
		Brake Pull Strap	_
15834		Body frame Arrangement (front end)	23.6.33
15835		Arrangement of Body Frame (rear end)	23.6.33
15836		Special leading axle	24.8.33
15837		Arrangement of 4"-1" headboard	23.6.33
15838		Drilling in Cross Members for Control Rods	23.6.33
15839		Drilling in Cross Members for Control Rods	24.6.33
15840	A/G	Steam Brake Lever - inner	23.6.33
	B	Oil Trough Distance piece	_
	C	Gear Case Oil Trough	_
	D	Lubricator Test Valve Body	_
	E/J	Test Valve Oil pipe	_
	F	Test Valve Adaptor	_
	H	Camshaft Oil Trough	_
15841		Arrangement of Rear bogie Axle	23.6.33
15842		Control Shaft	20.6.33
	F	Chain case LH	_
	E	Chain case Cover	_
	G	Chain case RH	_
15843		30" dia Tyre and Wheel Centre	23.6.33
15844		Control Shaft	19.6.33
		Control Shaft	_
		Control Shaft	_
		Control Shaft	_
15845	A	Arrangement of Frame	27.6.33
	B	Arrangement of Frame	_
15846
15847		Arrangement and Detail of Saloon type canopy	13.3.33
15848		Detail of Apron Plate for DG waggons	15.2.30
15849		Footplate	7.3.32
15850		Bogie Centre Casting	29.7.33
15851		Rear Wheel (rigid six wheeler)	25.8.27
15852	A	Dipper Rod Pipe	27.6.33
	B	Dipper Rod	_
	C	Dipper Rod Pipe Tee piece	_
	D	Tee Piece Locking plate	_
	E	Check Valve Body	_
		Pins	_
		Gib Key	_
15853	A	Arrangement of Rear Mudguard and tyre carrier	28.6.33
	B	Tyre Carrier frame	_
	C	Rear Mudguard Front Stay Support bracket	_
	D/E	Body side Support angle	_
	G/F	Rear Mudguard Bottom stay (front half)	_
15854		Tank Complete	29.6.33
15855	A	Engine Suspension Link Bracket	29.6.33
	B	Engine Suspension Link	_
	C	Suspension Link Cap	_
	D	Suspension Link Buffer	_
15856		Arrangement and Detail of Rnd Tipping platform	29.6.33
15857		Conical Grate (3/4" spaced)	30.6.33
15858	A/B	Platform Rear Corner angle	30.6.33
	C/D	Platform Front Corner angle	_
	E/F	Headboard Side angle	_
	M	Side End Protection plate	_
	G/H	Platform Rear Corner angle	_
	J/K	Platform Front Corner angle	_
	L	Body Side Angle	_
	N	Body Side Hinge boss	_
15859		Axlebox	30.6.33
15860		Arrangement and Detail of frame	1.7.33
15861	A	Rear Cross Channel	3.7.33
	B	Rear Drawbar Bracket channel	_
	C/D	Rear Drawbar Horn plate	_
	E	Cross and Drawbar Channel cleat	_
	F/G	Rear Support Channel Cleat stay	_
	H	Arrangement of Rear Drawbar bracket	_
	J	Platform Support Channel cleat	_
15862	A	Tank Filler, 200HP geared car	1.7.33
	B	Tank Internal Suction pipe	_
	C	Tank Internal Suction pipe	_
	D/E/F/G/H/J/K	Tank Sump Strainer	_
15863	A	Body Side Bottom angle	3.7.33
	B	Body Side Support channel	_
	C	Side Stiffener Cope bar	_
	D	Rear Axle Packing piece	_
	E	Front Axle Packing piece	_
15864		Arrangement of Controls Driving End	3.7.33
15865		Arrangement of brake Shoes	3.7.33
15866	A	Arrangement of Turntable	1.7.33
	B/C	Turntable Side Channel	_
	D/E	Turntable Cross channel	_
	F/G	Rear Spring Channel	_
	H	Rear Cross Channel cleat	_
15867
15868	A/B	Side front End protection Plate	4.7.33
	C	Tailboard End protection plate	_
	D	Side rear End protection plate	_
	E	Centre Post Stanchion	_
	F/G	Centre Post Gusset plate	_
	H	Centre Post Stanchion Backing Plate	_
	J	Centre Post stanchion	_
15869	A	Axlebox Cover (outside)	3.7.33
	B	Axlebox Cover (inside)	_
	C	Thrower Ring	_
	D	Distance ring	_
	E	Axle End Thrust Cap	_
	F	Spring T Link	_
15870	A/B	Engine Side Suspension bracket	4.7.33
	C	Drilling for Boiler feet	_
	D	Front Wheel cap	_
15871		Klingers patent AB 18 KU Type Guage Cocks with K.III gauge body	14.6.33
15872		Arrangement of Sanding Gear	5.7.33
15873		Spring Pad	5.7.33
15874		Arrangement of Drilling in Footplate	6.7.33
15875	A	Sanding Valve Rod	5.7.33
	B	Sanding Gear rod	_
	C	Cross Channel	_
	E/F	Spring Bracket Distance piece	_
	D	Tyre carrier	_
15876		Rear Wheel Hub	6.7.33
15877		Arrangement of Forecarriage	6.7.33
15878		Arrangement of 3 Way Tipping platform	27.7.33
15879		Rear Axle	7.7.33
15880	A/B	Rear Axle Shaft	10.7.33
	C/D	Rear Axle Shaft	_
15881	A	Rear Axle Shaft cover	11.7.33
	B	Rear Wheel Hub Bolt	_
	C	Oil Thrower Fixing screw	_
	D	Front Wheel Stop Pin	_
	E	Spring Pad Cover Set pin	_
	F	Bogie Pivot Pin bush Set pin	_
15882	A	Arrangement of Front mudguard	7.7.33
	B	Front Mudguard Rear support	_
	C/D	Front Mudguard Support bracket	_
	E/J	Tank internal pipe	_
	F	Steady plate	_
	G	Body Extension Support	_
	H	Washer plate	_
15883	A	Weir Pump Support bracket	8.7.33
	B	Weir Pump Support bracket	_
15884	A/B	Rear Mudguard (rear end) standard rigid six wheeler	10.7.33
	C/D	Rear Mudguard (front end) standard rigid six wheeler	_
15885	A	Rear Drawbar Bracket	10.7.33
	B	Drawbar Buffer Housing	_
	C	Drawbar Bracket Boss	_
	D	Drawbar Buffer	_
	E	Drawbar Stop Plate	_
	F	Front Drawbar Pin boss	_
15886		Sentinel Patent Water Tube Boiler	8.5.33
15887
15888
15889
15890
15891
15892
15893
15894
15895
15896
15897
15898
15899		Arrangement of Drawbar Buffer	10.7.33
15900		Proposed Arrangement of Tractor with DG engine	10.7.33
15901		Proposed Arrangement of Tractor with 'Sentinel' Engine	10.7.33
15902	A	Pivot Top Casting	13.7.33
	B	Pivot Bottom Casting	_
15903	A	Arrangement of Turntable Pivot	18.7.33
	B	Pivot Pin	_
	C	Pivot Pin Bush	_
	D	Thrust Lining	_
	E	Pivot Pin Collar	_
15904		Upper Structure arrangment
15905		Arrangement of Bogie	26.8.33
15906		Brake Arrangement Air and Hand	14.3.33
15907
15908	A	Arrangement of Tyre Carrier	11.7.33
	B	Tyre carrier Stay	_
	C	Headboard Catch Bracket	_
	D	Headboard Binding plate	_
	E/F	Apron Plate Stay	_
15909	A	Arrangement of Hinged Headboard	11.7.33
	B	Cab Door Winding Window Glass	_
	C	Cab Side Window glass	_
	D/E	Wheel Arch	_
	F/G	Wheel Arch	_
15910		Proposed Arrangement Six Wheeled trailer	12.7.33
15911	A	Tipping Cylinder	12.7.33
	B/C	Tipping Cylinder bracket	_
15912	A	Arrangement of Turntable pivot	12.7.33
	B	Pivot Pin	_
	C/D	Spring Front Bracket Packing piece	_
	E/F	Spring Rear Bracket Packing piece	_
	G/H	Pivot Channel Centre Gusset (bottom)	_
15913	A	Pivot Top Casting	11.7.33
	B	Pivot Bottom casting	_
15914	A	Steam Brake Pedal lever	25.7.33
	B	Steam Brake Shaft Lever (outer)	_
	C	Pedal	_
	D	Accelerator Pedal Lever	_
	E	Front Spring Slipper plate	_
	F/G	Inside and Outside Washers (silent bloc)	_
15915	A	Side Centre Stanchion	15.7.33
	B	Centre Stanchion gusset	_
	C	Skid Bar Eye bolt	_
	D/M	Front Corner plate (top)	_
		Stanchion Corner stay	_
	F/G	Front stanchion	_
15916		Arrangement of Buffers and Drawgear	14.7.33
15917		Arrangement of Piping - Boiler end	29.8.33
15918		35" Dia Wheel *text missing*	14.7.33
15919	A	Arrangement of Canopy Roof sliding door	15.7.33
	B/H	Canopy Roof Sliding door	_
	C/D/E/F/J/K/L/M	Rail for Canopy Roof Sliding Door	_
	G	Guide Rail for canopy Roof Door	_
15920		Auxiliary Drive casing	17.5.33
15921		Lubricator Body, SD
15922	A	Lubricator Body Cover	30.7.33
	B	Lubricator Cover lid	_
	C	Air Pump Pinion	_
	D	Dynamo Drive Spur wheel	_
	E	Dynamo Pinion	_
	F	Lubricator Oil Filter	_
15923		Arrangement and Deatil of Frame	17.7.33
15924		Arrangement of Wheel and Axles	19.7.33
15925	A/B	Platform Rear Corner angle	17.7.33
	C/D	Platform Front Corner angle	_
	E	Tailboard catch bracket	_
	F	Tailboard catch bar	_
	G/H	Headboard Side angle	_
	J/K	Headboard Side angle	_
15926	A/B/C/J/K	Bogie Suspension Links and brackets	6.4.36
	D	Top Pivot cover	_
	E	Spring Hanger washer	_
	F/G	Hornblock Liner	_
	H	Oil Nipple (special)	_
15927		Arrangement of Trailer frame	18.7.33
15928		Arrangement of Frame	15.7.33
15929	A/B	Turnatble Side channel	6.7.33
	C	Turntable Rear Cross channel	_
	D/E	Turntable Pivot channel	_
	F	Turntable Front cross channel	_
15930	A/B	Side Channel, trailer	18.7.33
	C/D	Rear Spring Channel	_
	E/K	Frame Centre and Front Cross channel	_
	F/G	Frame Pivot frame	_
	L	Frame Pivot Channel centre gusset	_
15931		30" Tyre and Wheel centre
15932	A/K	Rear Cross channel	10.7.33
	B/C	Rear Cross channel cleats	_
	D/E	Front and rear Cleat	_
	F/G	Turntable Front stay	_
	H/M	Top Turntable ring	_
	J/L/N	Bottom Turntable ring	_
15933		Bissel Truck Casting	19.7.33
15934	A/J	Tyre carrier Front half	7.7.33
	B/K	Tyre carrier Rear half	_
	C/D	Rear Mudguard Rear half	_
	G/H	Rear Mudguard , Bottom Bracket	_
15935	A/B	Frame Truss arrangment	19.7.33
	C/D	Side Channel truss	_
	L/M/F/P/R	Frame Truss strut	_
	H	Turntable distance piece	_
	G	Trailer Hand Brake Bracket	_
	J/K/N	Turntable Ring packing piece	_
15936	A	Tyre carrier stay
	B	Arrangement of tyre carrier	_
	F	Brake Pulley Distance piece	_
15937		Hub, timber trailer	20.7.33
15938	A	Bogie Frame inner	20.7.33
	B	Bogie Frame outer	_
15939		Alteration to Brake Shoes	20.7.33
15940	A	Pivot Pin Bracket (bottom)	20.7.33
	B	Pivot Pin Bracket (top)	_
	C	Pivot Pin	_
		Drawbar pin	_
	E	Turntable Ring (bottom)	_
	F	Turntable Ring (top)	_
15941		Hornblock
15942	A	Superheater Coil - outer	3.8.33
	B	Superheater Coil - inner	_
15943		Bogie Axles	14.9.33
15944		Arrangement and Detail of Frame	21.7.33
15945		Arrangement of Turntable, trailer	6.7.33
15946	A/B	Rear Spring Rear Bracket	14.7.33
	C	Spring Plate support	_
	D/M	Rear Spring Rear Bracket support	_
	E/N/F/P	Front Pivot Cross channel cleat	_
	G/H	Front Pivot Cross channel cleat	_
		Tipping Cylinder Cross channel packling	_
	K/L	Front Cross Channel cleat	_
15947	A	Dynamo Coupling cover	21.7.33
	B	Lubricator Worm Wheel	_
	C	Aux. Drive casing cover	_
	D	Tyre Pump Sriker guide	_
	E	Lubricator Heating Pipe	_
	F	Tyre pump Striker	_
	G	Brake Rod Lock nut	_
15948	A	Arrangement of tailboard	21.7.33
	B	Centre Catch Stirrup	_
	C	Centre Catch strap	_
	D	Centre Catch Stirrup bolt	_
	E	Platform Rear channel bracket	_
15949	A/C	Superheater Coil - inner	21.7.33
	B/D	Superheater Coil - outer	_
15950	A	Delivery Bend	8.8.33
	B/E	Delivery Air vessel Bend	_
	C	Suction bend	_
	D	Suction Plug cock	_
15951		Arrangement of Wheels and Axles	21.7.33
15952		SD Tank waggon
15953		Spring Bracket	24.7.33
15954	A	Swing Link bracket	28.3.33
	B	Swing Link bracket cover	_
15955	A	Brake Hanger bracket	24.7.33
	C	Sandbox	_
	D	Whistle base	_
	E/H	Sandbox	_
15956		Throttle and Reversing gear arrangement	16.11.33
15957		Rear Wheel Hub	21.8.33
15958	A	Front axle	24.7.33
	B	Turntable Ring	_
	C	Front Hub Cap	_
	D	Tyre Carrier plate	_
15959	A	Dynamo Support bracket	26.7.33
	C	Reversing Quadrant	_
	B	Dynamo Driven Sprocket	_
	D	Reversing Lever index plate	_
15960	A	Spring Pad	25.7.33
	B	Spring Pad Bottom plate	_
	C	Spring Top plate	_
	D	Brake Drum	_
	E	Rear Bogie Axle Protection tube	_
15961		Top Pivot Casting	25.7.33
15962
15963	A	Axle Box	31.7.33
	B	Axle Box End Cap	_
	C	Bearing Distance piece	_
	D	Axle Box cover	_
15964		Arrangement of Sandboxes, 600HP Loco	28.9.33
15965	A	Axle Oil Thrower ring	22.11.33
	B	Axle End Thrust cap	_
	C/G	Thrust Cap Locking plate	_
	D	Axle Box Guide liner	_
	E/F	Axle Box guide	_
15966
15967	A/B	Bulb Angle Support stay	27.7.33
	C	Centre Channel and Rear Cross channel cleat	_
	D	Bulb Angle and Front Cross Channel cleat	_
	E	Rear Cross Channel cleat	_
	F/G	Rear Tipping Cylinder Cross Channel support	_
	H/J	Front Tipping Cylinder Cross Channel support	_
	K	Rear Tipping Cylinder Cross Channel Plate	_
	L	Front Tipping Cylinder Cross Channel plate	_
15968	A	Brake Coupling Rod	27.7.33
	B/C	Side Channel (outside)	_
	D/E	Side Channel (inside)	_
	F	Front Cross channel	_
15969	A	Hornblock Keep	27.7.33
	B	Bogie Safety Bracket	_
	C	Bissel Truck Check spring	_
		Special Washer	_
		Taper Washer	_
	G	Sandbox Support bracket	_
15970	A	Air Compressor Stay plate	28.7.33
	B	Air Compressor Stay bracket	_
	C	Air Compressor Stay bolt	_
	D	Arrangement of Air Compressor stay	_
15971	A	Rear Cross channel	31.7.33
	B/D	Tipping Cylinder Channel (rear)	_
	C/E	Tipping Cylinder Cross Channel (front)	_
15972		Bogie Frame stay	29.7.33
15973		Arrangement of Dynamo Drive	29.7.33
15974		Conversion to Roller ?BoS? For Rear Axle for 4 ton trailer	29.7.33
15975	A/B	Rear Mudguard Front half	31.7.33
	C/D	Rear Mudguard Front half top stay	_
	G/H	Rear Mudguard Rear half top stay	_
	E/F	Rear Mudguard, Front Half Bottom stay, CANCELLED by 15975 K&L	_
	J	Protection plate	_
	K/L	Rear Mudguard Bottom Stay (front half)	_
15976
15977		Arrangement of Tipping Platform	31.7.33
15978		Arrangement of Under Slung Water tank	31.7.33
15979		Delivery Bend flange	9.8.33
	B	Suction Plug Cock flange	_
	C	Suction Pipe Flange	_
	D	Plug Cock Stiffening ring	_
	E	Suction Plug Cock joint	_
	F	Injector Support bracket	_
	G/H	Overflow Pipe Bracket and Clip	_
	J/K	Injector Handle Guide bracket	_
15980	A	Turntable Frame	1.8.33
	B	Turntable Ring support channel	_
	C	Pivot Support channel	_
15981	A	Pivot Support channel	1.8.33
	B	Turntable Frame Gusset	_
	C	Pivot Pin Top Plate	_
	D/M	Pivot Pin Cotter plate	_
	E	Drawbar Eye Bolt Washer plate	_
	F	Steering Lock Stop plate	_
	G/J	Steering Lock stop	_
15982	A	Tipping Platform Stop Bracket	1.8.33
	B	Steam Brake gear Cross Support	_
	C/D	Steam Brake Cylinder Support angle	_
	E	Brake Compensating Link	_
	F	Headboard Stanchion	_
	G/H	Headboard Side angle	_
15983		Arrangement of Buffing and Drawgear	20.11.33
15984	A	Rear Cross Channel	2.8.33
	B	Rear Frame Gusset	_
	C	Rear Frame Gusset	_
	D	Support plate(centre)	_
	E/F	Support Plate (outside)	_
	G	Pulley Bracket Support angle	_
	H	Brake Rope Guard (LH side)	_
15985	A	Pole Stirrup (front)	2.8.33
	B	Pole Stirrup (rear)	_
	C	Front Bolster Support	_
	D	Drawbar Eyebolt	_
	E	Tyre carrier Angle (rear)	_
	F	Tyre carrier Angle (front)	_
15986		Rear Hub for Roller Bearings for 3 - 4 ton trailer	2.8.33
15987		Trailer Rear Spring pad	1.5.33
15988		Front and Rear Axle	3.7.33
	B	Oil Retaining ring	_
	C	Felt Washer for oil retaining ring	_
	D	Roller bearing Adjusting nut	_
	E	Roller bearing Adjusting washer	_
15989	A	Brake Shaft bracket	3.8.33
	B	Bissel Truck Arm bracket	_
	C	Axlebox Dust cover	_
	E	Plug for Axlebox	_
	D	Bissel Truck Arm bush	_
15990	A	Boiler Top Cleading	3.8.33
	B	Coaling Ladder Carrying bucket	_
	C/E	boiler Top Dog Cap nut	_
	D	Boiler Cleading stud	_
15991		Bolster End Casting	17.10.33
15992	A/F/G	Damper Handle	4.8.33
	B	Damper Stop Plate	_
	C	Ashapn Hinge pin	_
	D	Hinge Pin Ring	_
	E	Ashpan	_
15993	A/B	Ashpan Hinge - rear	2.8.33
	C	Ashpan Hingebracket	_
	D/E	Damper Guide	_
	F/G	Damper handle clip	_
15994		Arrangement of Trailer Steam Brake Gear	4.8.33
15995		Brake Rope Guide block	9.3.33
	B	Brake Rope Guide tube	_
	C	Arrangement of Front Mudguard	_
	D	Front Mudguard Support bracket	_
	E/F/S	Front Mudguard Rear Support	_
		Mudguard Stiffening strip	_
	P/Q	Rear Mudguard Front stay	_
15996	A	Brake Rope Guard (RH side)	4.8.33
	B/C	Bolster Bracket	_
	D	Pole Roller bracket	_
	E	Brake Rope pulley	_
	F	Distance piece	_
	G	Trailer Brake Stirrup Guide packing	_
	H	Alterations to Rear Cover	_
	J/K	Tank Manhole and Cover and Ring (on rear cover)	_
15997	A	Relief valve adpater	4.8.33
	B	Plug for Relief Valve adaptor	_
	C	Pressure Gauge nipple	_
	D	Modifications to Feedheater body 8246A	_
	E	Arrangement of Feedheater Top as modified	_
15998		Heavy Bogie Springs	3.8.33
15999		Light Bogie Spring	4.8.33