12250	A	Piston	7.8.30
	B	Piston	_
12251		Arrangement of Brake and Regulator controls	12.8.30
12252
12253	A	Electrically Operated valve, railcar remote control	6.8.30
	B	Electrically Operated valve, railcar remote control	_
12254	A	Valve Body	8.8.30
	B	Valve Cover	_
	C	Valve Spring washer	_
	D	Valve (spring closed position)	_
	E	Valve (spring open position)	_
	F	Valve Seat Plate (spring closed type)	_
	G	Valve Seat plate (spring open type)	_
12255	A	Steering Drag Link	12.8.30
	B	Rear Cross channel	_
	C	Frame front Cross channel	_
	D	Boiler carrying angle	_
	E	Boiler Front Support channel	_
	F	Boiler Front Support channel cleat	_
12256	A	Connecting Rod	9.8.30
	B	Connecting Rod Cap	_
	C	Connecting Rod Bush	_
12257		Arrangement of Tractor Frame fitted with Overtype winch	12.8.30
12258		Oil Tank for Geared Car	11.8.30
12259		Detail of Cab and Bunker	11.8.30
12260	A/B	Cab Wing Cope Iron(back)	11.8.30
	C/D/E/F	Cab Wing Cope iron	_
	G/H	Canopy Stanchion	_
	J	Tool Box	_
	K/L/M/N	Apron Plate(tractor), CANCELLED - never used 1.10.30	_
12261		Arrangement of Canopy and crate Bunker for DG tractor	8.9.30
12262		Arrangement of Super-Sentinel 6 ton Refuse collecting waggon, end tipping capacity 600 Cu Ft	11.8.30
12263	A	Inner Funnel	13.8.30
	B	Funnel Outer Casing	_
	C/D	Frame Stiffening plate	_
	E	Boiler Foot Support	_
	F	Boiler Foot Support(side)	_
	G	Modification to Studs of Bottom Joint of boiler drg no. SB1618	_
12264		Drilling in Cross Members for Control Rods, geared car	1..9.30
12265	A	Feed Pump Body	12.8.30
	B	Pump Valve Chest	_
12266		Arrangement of Oil Fuel Gear, geared car	17.9.30
12267		200HP Coal Burning Boiler	13.8.30
12268		Trailing Axle DE geared loco	13.8.30
12269		Arrangement of Leading Wheels and Axles (12269A/B)	14.8.30
12270		Arrangement of Stud Box, tractor	13.8.30
12271	A	Arrangement and Detail of Toolbox, tractor	2.9.30
	B/C	Tank Carrying Boards, DG tractors	_
	D	Tank Carrying Boards	_
12272	A	Feed Pump Eccentric sheave	14.8.30
	B	Spur Pinion	_
	C	Feed Pump Eccentric Strap cap	_
	D	Feed Pump Eccentric Strap	_
	E/F/G	Feed Pump Ram	_
12273	A	Main Bearing Bush(centre)	14.8.30
	B	Main Bearing Bush(ends)	_
	C/D	Main Bearing Cap(centre)	_
	E	Main Bearing Cap(inter)	_
12274		Cast Iron Water Tank, DE Geared loco	15.8.30
12275		Arrangement of Jackshaft for railcoach, jersey rlys and trams Ltd	15.8.30
12276		Arrangement of reversing gear	15.8.30
12277		Crankcase	14.8.30
12278	A	Reversing Bell Crank Lever	25.8.30
	B	Reversing Lever	_
	C	Bell Crank Lever Pin Distance piece	_
	D	Bell Crank Lever pin	_
	E	Reversing Shaft Bearing, never used	_
	F	Reversing Shaft Bearing, never used	_
	G	Reversing Quadrant Plate angle	_
12279	A	Reversing Quadrant plate	25.8.30
	B	Reversing Quadrant plate stay	_
	C/D	Reversing Rod Block	_
	E/F	Reversing Rod Block	_
	H	Step plate	_
	J	Footstep angle	_
12280	A	Engine Sub Frame bracket	1.9.30
	B	Engine Sub Frame plate	_
	C	Damper Guide Bar pillar	_
	D	Damper Guide Bar Steady	_
12281		Arrangement of Frame, san paulo rly	13.9.30
12282		Arrangement and details of Footplates, DE loco	12.9.30
12283		Frame details	11.9.30
12284		Suction Pipe	18.12.30
		Suction Pipe	_
		Suction Pipe	_
		Suction Pipe	_
	K/L	Suction Pipe	_
12284 2nd	A	Suction pipe	2.9.30
		Suction pipe	_
12285		Counterhsaft Spur Centre(high gear)	9.9.30
12286		Countershaft Spur centre(low gear)	18.9.30
12287		Arrangement of Engine Cover	3.9.30
12288	A	Control Column Index plate,front end of coach, geared railcoach with automatic vacuum	5.9.30
	B	Control Column Index plate,rear end of coach, geared railcoach with automatic vacuum	_
12289	A	Oil Pump Body
	B	Oil Pump Cover	_
	C	Pump Eccentric Shaft bush	_
	D/F	Connecting rod bush	_
	G/E	Wrist pin	_
12290		Crankshaft	2.9.30
12291		Arrangement of Boiler showing Position of fittings	2.9.30
12292	A	Layshaft Gear	2.9.30
	B	Driving Gear	_
	C	Sliding Gaer	_
12293	A	Arrangement of Double Hinged Tailboard for DG4 three way tipper	3.9.30
	B/C	Tailboard Protection Plate	_
	D	Rear Number Plate support	_
	E	Rear Stanchion	_
	F/G/H	Cross Chain	_
	J	Compensg Link Angle Support	_
12294	A	Instruction plate, geared car	6.9.30
	A	Marking on Check Valve plug 3131D	_
	R	Marking on Check Valve plug 3131D	_
	S	Boiler pressure Gauge nameplate	_
	T	Funnel Blast Pressure gauge	_
	U	Vacuum Gauge namplate	_
	B	Front Injector Valve nameplate	_
	C	Rear Injector Valve nameplate	_
	D	Injector Lifting Nozzle valve nameplate	_
	E	Rera Pressure Gauge Valve nameplate	_
	F	Oil Heater Valve nameplate	_
	G	Vac Brake valve nameplate	_
	H	Turbo Generator valve nameplate	_
	J	Lubricator Steam valve nameplate	_
	K	Blower valve nameplate	_
	L	Whistle Valve nameplate	_
	M	Engine Oil Pump nameplate	_
	N	Heavy Oil Indicator plate	_
	P	Light Oil indicator plate	_
12295	A	Control Shaft Lever	5.9.30
	B/J	Sand Box Lever	_
	D/E	Sand Pipe Stay(leading), CANCELLED never used 8.12.30	_
	C	Sanding Control Shaft	_
	F/G	Sandpipe Stay(trailing)	_
	H	Sand Rod Guide block	_
12296		Arrangement of Wheel and Axle, the deli spoorweg maatschappij geared car	10.9.30
12297		Self Contained Buffer for Sao Paulo Railway	3.9.30
12298	A	Drilling for Steam Brake Cylinder Support plate	4.9.30
	B/C	Rear Corner plate	_
	D	Rear Cross Bearer Gusset	_
	E	Rear Bearer for DG4 platform 17'-6' x 7'-4 3/4'	_
	F	Wire Rope clamp	_
	G	Front Lamp Bracket collar	_
12299		Crankcase Oil Sump	3.9.30
12300
12301		Rolled Steel Wheel Centre and Steel tyre	6.9.30
	A/B	Section of Tyre	_
	C/D	Section of Tyre	_
12302		Rolled Steel Wheel Centre and Steel tyre	5.9.30
	A/B	Section of Tyre	_
12303		Rolled Steel Wheel Centre and Steel tyre	8.9.30
	A/B	Section of Tyre	_
12304	A/B	Engine Cover Panel	4.9.30
	L/M/N	Engine Cover Top	_
12305	A	Engine Cover Strap	4.9.30
	B	Engine Cover Butt Strap	_
	C/D	Engine Cover Fixing angle, front, side	_
	G/H	Engine Cover Fixing angle rear	_
	E	Centre Butt Strap LH	_
	F	Damper Handle bracket	_
	K	Engine Cover Fixing angle front	_
12306	A	Trailer Front and Rear Axle	16.9.30
	B	Trailer Wheel Bush	_
		Draw Bar bolt	_
	D/F	Turntable Cross Channel cleat	_
12307	A	Arrangement of Headboard	5.9.30
	B/C	Platform Front centre angle	_
	D/E	Platform Rear corner angle	_
	F	Tailboard and Side Extension socket	_
	G	Body Side Stanchion	_
12308		Arrangement of Sanding gear, sao paulo	12.9.30
12309		Proposed Arrangement of trailer	5.9.30
12310	A	Boiler Top plate	5.9.30
	B	Superheater Steady plate	_
	C	Superheater Steady plate	_
	D	Tank Double Filter Hole Cover plate	_
12311		Strainer plate	5.9.30
	E	Air Door Pull Rod extension, woolnough boiler	_
	D	Strainer plate	_
12312	A	Intermediate Gland and Partition	5.9.30
	B	End Bearing Cap(pump end)	_
	C	Auxiliary Drive Casing	_
	D	Auxiliary Drive casing cover	_
	E	Intermediate Spindle hole cover	_
12313	A	Crankcase End Cover(gear box end)	5.9.30
	B	Crankcase End Cover(pump end)	_
	C	Crankcase Back Cover	_
12314	A/B	Bogie Spring, DG6, NEVER USED	6.9.30
	C/D	Bogie Spring, DG6 tipper, NEVER USED	_
12315		DG Tractor Footplate	5.9.30
12316		Arrangement of DG4 End Tipping Waggon with 3" - 10" fixed sides and hinged tailboard	6.9.30
12317	A/B	Frame Axle	8.9.30
	C	Brake Bracket LH	_
	D	Brake Bracket RH	_
	E/F	Brake Bracket Inside angle	_
	G/H	Brake Bracket Support angle	_
	J/K	Brake Bracket Gusset plate	_
	L	Rear Buffer Beaqm Stiffening angle	_
	M/N	Boiler Seat Plate angle(buffer beam)	_
12318	A	Side Support knee	10.9.30
	B/C	Front Side Rear Cover plate	_
	D/E	Rear Side Rear Cover plate	_
	F/G	Rear Side Front cover plate	_
	H/J	Front Side Front Cover plate	_
	K	Body Side Front stanchion	_
	L	Body Side Centre stanchion	_
	M	Body Side Rear stanchion	_
12319	A	Canopy Flame and protection plate	8.9.30
	B	Tank carrying board	_
	C/D/E/F	Cab Wing Cope Iron	_
	G	Tank Strap	_
	H	Arrangement of Tank Board Support	_
	J/K	Support Tie angle	_
12320		Arrangement of Sanding Gear, polish state rly	8.3.30
12321	A/B	Headboard Protection plate	10.9.30
	C	Side Fixing plate	_
	D	Tailboard End Cover plate	_
	E	Tailboard Hinge	_
	F/G	Body Side Stiffener(front)	_
	H/J	Body Side Stiffener(rear)	_
12322		Special Brake Shoes, DG4 waggon	10.9.30
12323
12324	A	Counter Shaft Sprocket	10.9.30
	B	Counter Shaft Sprocket	_
12325		Arrangement of Body Side for Special DG4 end tipper	9.9.30
12326		Arrangement of Cab Roof Ventilator	9.9.30
12327	A/B	Life Guard Trailing	10.9.30
	C/D	Life Guard Leading	_
	E/F	Gear Case Guard Cleat	_
	J/G	Footplate Support(buffer beam)	_
	H	Gear Case Guard	_
12328	A	Brake Adjusting palm
	B	Brake Rod Coupling screw	_
		Brake Hanger bush	_
		Brake Hanger Bracket pin	_
	E	Brake Column Seat	_
		Brake hanger Bush	_
	F	Brake Coupling rod	_
12329	A	Side Centre Washer plate	11.9.30
	B	Front Side Fixing plate	_
	C/D	Side Support Angle(front)	_
	E/F	Side Support angle(rear)	_
	G	Vertical Cope Bar	_
	H	Side Rear Washer plate	_
12330	A/H/J	Intermediate Gear Wheel bush	10.9.30
	B	Layshaft Gear Bush(large gear end)	_
	C	Driving Spiral Gear bush	_
	D	Crankshaft Extension bush	_
	E	Control Box Bush	_
	F	Intermediate Gear Wheel Spindle	_
	G	Intermediate Gear wheel	_
12331
12332	A	Camshaft End Cover	10.9.30
	B	Camshaft Bush - Centre	_
	C	Gear Shipper	_
	D	Camshaft End Stop - rear	_
12333	A	Tarpaulin Bow Support	10.9.30
	B	Bow Support Bracket(front)	_
	C	Bow Support Bracket(centre)	_
	D	Tank Board Support angle(rear)	_
	E	Extended Cab Stay	_
	F	Compensg Link Guide Angle Support	_
	G	Compensg Link Guide Angle Support	_
12334	A	Runner Angle - Support bracket	15.9.30.
	J/C	Buffer Beam Gusset plate	_
	B	Gusset Plate Fixing angle	_
		Frame Stretcher angle (buffer beam)	_
	D	Front Buffer Beam Stiffening angle	_
	G	Drawbar Plate	_
	H	Drawbar Steady plate	_
12335		Arrangement of 20'-0' body with Sides and Tarpaulin Bows: and Cab with Auxiliary Bunker and Canopy rack	11..9.30
12336	A	Stiffening plate(engine casing)	10.9.30
	B	Stiffening Plate(cab)
	C	Lamp Bracket	_
	D	Injector Bracket	_
	E	Injector Overflow pipe	_
	F	Injector Overflow Pipe	_
	G	Injector Bracket Foot angle	_
	J	Injector Overflow pipe	_
	H	Injector Overflow pipe	_
	K	Chain Lubricator Nipple plate	_
12337	A/B	Turntable Side Channel	19.8.30
	C/D	Frame Cross Channel	_
	E/P	Frame Rear Cross channel	_
	F	Cross Bearer cleat, CANCELLED	_
	G/H	Turntable Gusset plate	_
	J	Front Cross Channel cleat	_
	K/L	Turntable Pivot channel cleat	_
	M/N	Eye Bolt bolster	_
12338	A	Arrangement of Turntable	18.9.30
	B/C	Turntable Pivot Channel	_
	D	Turntable Rear Cross channel	_
	E	Turntable Cross Channel	_
	F/G	Turntable Front Cross channel	_
12339	A	Brake Rope Pulley bracket	19.9.30
	B	Draw Bar Bolt Eye Bolt, CANCELLED	_
	C/L/M/P	Hand Brake Lever	_
	D	Floor End Protection angle	_
	E/K/N	Tail Rail Cope bar	_
	H/F	Hand Barke Lever bracket	_
	G	Stop valve Spring stop	_
12340		Arrangement of Apron plate, DG tractor	11.9.30
12341	A	Bunker Plate	10.9.30
	B	Apron Plate Angle Iron	_
		Pump Bracket to Suit Weir Feed Pump, CANCELLED NEVER USED 22.9.30	_
		no description CANCELLED NEVER USED 22.9.30	_
12342		Detail of Frame for Special DG4 End Tipping Waggon	11.9.30
12343	A	Camshaft Bush-Gear case end	11.9.30
	B	camshaft Bush - pump end	_
	C	Engine Suspension Bracket	_
	D	Engine Suspension pin	_
	E	Engine Suspension Link	_
12344		Arrangement of Experl Deflector for oil return from Dynamo Drive Casing, DG waggons	11.9.30
12345		Assembly of Drawgear	11.9.30
12346	A	Front LH Side Panel	12.9.30
		Front RH Side Panel	_
12347	A	Torque Stay	21.10.30
		Torque Stay	_
	C	Torque Stay	_
	E	Torque Stay	_
12348	A/B	Trailer Side Channel	18.9.30
	B/C	Turntable Ring(bottom)	_
	D	Turntable Ring(top)	_
12349		Arrangement showing Holes in Footplate	24.9.30
12350		Oil Tank Stand	12.9.30
12351		Arrangement of Body for Super Sentinel Articulated Six Wheeler	12.9.30
12352	A	Engine Cover End panel	12.9.30
	B	Buffer Beam Stiffener (top)	_
	C	Buffer beam Stiffener Plate(front)	_
	E/F	Stretcher plate side angles	_
	D	Buffer Beam Stiffener plate(rear)	_
	G	Runner Angle Zsupport Bracket packing piece	_
12353	A	Layshaft	13.9.30
	B	Layshaft End Cover	_
	C	Gear Shipper shaft	_
		Control Spindle	_
	E	Crankshaft Extension(gear box end)	_
12354	A	Arrangement of Stewart Speedometer fitted to DG4&6 waggons	15.9.30
	B	Oil Pump Bracket	_
12355	A	Valve Guide	16.9.30
	B	Push Rod Adjuster	_
	C	Tappet(top)	_
	D	Tappet(bottom)	_
	E	Steam valve	_
	F	Exhaust Valve	_
12356	A	Shoulder Washer, loco number plate	12.5.32
	B	Mitre Wheel Spindle washer	_
	C	Special Washer(oil burner)	_
	D	Guide Plate washer	_
	E	Trestle Cross Bar Washer(inner)	_
	F	Trestle Cross Bar Washer(outer)	_
	G/J	Exhaust Pipe Joint washer	_
	H	5/16" Angle Tab Washer	_
12357	A	Cam Follower Guide	17.9.30
	B	Piston Ring	_
	C	blank, no description	_
	D/F	Valve Spring Top Seat	_
	E	Oil Filter Body	_
12358	A	Leading Weatherboard
		Rear Side panel, RH panel shown	_
	P/Q	Cab Corner angle	_
	R	Louvre Stud Bar - vertical	_
12359
12360		Arrangement of Tank Filler
12361	A	Tank Filler
	B	Filler lid	_
	C	Filler Lid Hinge	_
	D	Filler Lid Spring catch	_
	E	Filler Lid Joint - rivetted inside lid	_
	F	Lid Hinge pin	_
12362		Boiler Top Cover, 200HP coal fired boiler	16.9.30
12363		Rear Axle casing	17.9.30
12364	A	Crankshaft Extension (pump end)	19.9.30
	B	Crankshaft Spur Pinion	_
	C	Crankshaft Spur Pinion	_
	D	Conn Rod Bush Shim	_
	E	Main Bearing Shim(centre)	_
	F/G	Main Bearing Shim(ends)	_
	H	Main Bearing Shim(pump end)	_
12365		Arrangement of Buffers and Drawgear, san paulo rlys	17.9.30
12366
12367		Steam Brake Cylinder	29.7.30
12368		Rear Weatherboard	18.9.30
	H/J	Cab Corner angle	_
	K	Footstep on Rear Weatherboard	_
12369	A/J	Camshaft Finger	18.9.30
	B	Change Speed Lever(inner)	_
	C	Gear Shipper Shaft	_
	D	Steam Valve Cap	_
	E	Relief Valve Adaptor	_
	F	Pump Driving Pinion	_
	G	Pump Pinion with shaft	_
	H	Pump Pinion	_
12370		Arrangement of Power Unit, Nigerian car job. 8144	15.9.30
12371		Arrangement of Engine Suspension gear	18.9.30
12372	A	Air Pump Bracket, oil fired geared car	19.9.30
		Tank Strap	_
	C	Tank carrying Block	_
	D	Oil Control Quadrant Stiffg plate	_
12373	A/B	Spud Box Side Support angle(front)	20.9.30
	C	Side Support Angle Gusset plate	_
	D/E	Spud Box Bottom Cross angle	_
	F	Feed Heater support	_
	G	Weir Pump Support	_
	H	Ashpan Quadrant bracket	_
12374		Arrangement of Spud Box, DG tractor	20.9.30
12375		Proposed Arrangement for Conversion of a DG4 to a DG6 tipping waggon	20.9.30
12375 2nd		Proposed Arrangement for Conversion of a DG4 to a DG6 tipping waggon	24.9.30
12376		Arrangement of Cab Windows	1.10.30
12377	A/B	Rear Corner Plate(bottom)	23.9.30
	C/D	Stiffening Angle	_
	E	Rear Corner plate(top)	_
12378
12379		Detail of Tipping Platform for Special DG4 End Tipping Waggon	25.9.30
12380	A	Frame Cleat	25.9.30
	B/C	Frame Cleat	_
	D/E	Frame Cleat	_
	N/F	Stay Plate	_
	P/Q/M/G	Frame End plate	_
	H	Inside Rear Pivot Bracket packing	_
	J	Frame Distance piece	_
	K/L	Frame Cleat	_
12381	A	Loadweight(rear buffer beam)	3.10.30
	B	Loadweight(front buffer beam)	_
12382	A/H	Auxiliary Spiral Gear(driver)	22.4.30
	B/J	Spiral Gear(driven)	_
	C	Distance piece	_
	D	Cam Follower Guide dog	_
	E	Auxiliary Drive Spindle	_
	F	Cam Follower Gland lock	_
	G	Piston plug	_
12383	A	Arrangement of Headboard for DG4T with special fixed sides(3'-10' high) and Hinged tailboard	1.10.30
	B/C	Platform Front Corner angle	_
	D/E	Platform Rear Corner angle	_
	F	Body Side Support	_
	G	Body Side Support cleat	_
12384		Bunker, mechanical stoker	23.9.30
12385	A	Bunker Bottom plate (rear)	24.9.30
	B	Bunker Bottom Plate(front)	_
	C	Stoker Barrel	_
	D	Reversing Lever Quadrant	_
	E	Reversing Lever Index plate	_
	G	Jockey Pulley bracket	_
	F	Boiler Top Lagging plate	_
12386	A/B	Coal Bunker, capacity 12CWT	23.9.30
	C	Bunker Stiffening angle	_
	D	Bunker Foot angle	_
12387	A	Steam Camshaft, 5"x5 1/2" - 4 cylinder SA engine	23.9.30
	B	Exhaust Camshaft	_
12388	A	Bunker End angle(rear)	25.9.30
	B	Bunker End angle(side)	_
	C	Bunker Fixing angle, NEVER USED	_
	D/E	Doorway Stiffening angle, cab side	_
	F	Bunker Wearing plate	_
	G/J	Brake Handle guard	_
12389	A	Tailboard Hinge Bracket	9.10.30
	C/D	Tailboard End Protection plate	_
	E/F	Tailboard Hinge	_
	G/H	Hinge Bracket Locking catch	_
	J	Tailboard Inside Washer plate	_
	K	Tailboard Centre Washer plate	_
12390	A	Gear Shipper Shaft bush	24.9.30
	B	Gear Shipper Roller	_
	F	Balance Weight	_
	C/D/E	Arrangement of Oil Sump baffle	_
12391		MCA Coupler PH type	3.10.30
12392	A	Arrangement of Steering Gear Guard	24.9.30
	B	Steering Gear Guard support	_
	E	Foot Rest	_
	C	Steering Gear Guard Cross angle	_
	D	Foot Rest Support Distance piece	_
	F	Tank Centre Support Gusset(LH side)	_
12393
12394	A/B	Cab Roof Support angle	25.9.30
	C	Cab Foot angle	_
	D	Spark Tray Drain Cahnnel, CANCELLED never used 3.11.30	_
	F/E	Cab Foot Angle(side)	_
	G	Weather angle	_
12395		Arrangement of Uderslung tank	5.12.30
12396	A	Gear Change Lever	29.9.30
	B/L/K	Reversing Gear lever	_
	C	Crankcase End Cover felt washer	_
	D	Intermediate Gland felt washer	_
	E	Camshaft End Cover	_
	F	Filter Body Support	_
	G/H	Oil Sump Syphon pipe(internal and external)	_
	J	Locking plate	_
12397		Cab Roof	6.10.30
12398		Arrangement of Trailor Frame and Platform	25.9.30
12399	A/B	Tailboard Stiffening angle	9.10.30
	C	Tailboard Catch bar	_
	D	Body Side Cope bar	_
	E	Side front Cope bar	_
	F	Tailboard Catch bracket	_
	G	Tailboard Side Washer plate, CANCELLED?	_
	J	Side rear Cope bar	_
12400	A/K	Centre Main Bearing Stud	25.9.30
	B/L	Main Bearing bolt	_
	C	Crankshaft Pinion pin	_
	D	Gear Shipper Lever pin	_
	E/M/N	Balance Weight Bolt	_
	F	Engine Suspension stud	_
	J/H	Cylinder Lagging stud	_
	G	Cam Follower Guide Dog stud	_
12401	A	Special Plug for Firedoor chain	25.9.30
	D	Pump Spindle plug	_
	C/J	Bogie Short Axle plug	_
	E	Spark Discahrge Pipe plug	_
	F	Fusible plug	_
	B/K	Feed Pump ram plug	_
	G	1/2" - 1/2" adapter	_
	H	Drain Valve body	_
12402
12403	A	Spark Tray plate	3.11.30
	B/C	Spark Tray Fixing angle	_
	D	Water Tank Sieve	_
12404	A	Oil Sump Suction nipple	2.10.30
	D	blank, no description	_
	B	Main bearing Delivery Oil Pipe	_
	C	blank, no description	_
	E	blank, no description	_
	F	Feed Pump Body cover	_
	G	Cylinder lagging	_
12405		Arrangement of Injectors below Footplate	27.9.30
12406		Arrangement of DG6 Front Axle and Steering gear	3.10.30
12407	A	Steam Brake Push rod	1.10.30
	B	Brake Cylinder Support plate	_
	C	Special Drilling in Tipping Cylinder support channels	_
	D	Steam Brake Cylinder Support	_
12408	A/B	Cab Side Tee, CANCELLED	30.9.30
	E/C	Cab Door Top plate	_
	G	Cab Side Tee Butt Strap	_
	D	Detachable Louvre	_
	F	Roof Support angle(centre rear)	_
12409		Tropical Canopy to suit 8'-3' wide cab	29.9.30
12410		Rocking Firegrate	29.9.30
12410 2nd		Rocking Firegrate	29.9.30
12411		Arrangement of Mark VIII Standard Injector, (Holden and brooke Ltd)	3.10.30
12412		Arrangement of Mark X Sentinel Injector
12413
12414		Body Side Plate(outside)	9.10.30
12415	A	Rear Axle Driving Bevel	1.10.30
	B	Rear Axle Layshaft bevel	_
	C	Rear Axle Layshaft pinion	_
	D	Rear Axle Crown Wheel	_
12416		Arrangement of Extended cab and Tank Bearers	2.10.30
12417
12418		Arrangement of Engine Glands and Screw Pump, DG waggon 6x8 engine to suit spec DG H11/3&4	2.10.30
12419		Water Tank(underslung)	8.10.30
12420	A	Driving Bevel Housing	3.10.30
	B	Differential Bearing cap	_
	C	Driving Bevel Housing Gland	_
	D	Layshaft End Cover - LH	_
12421	A/B	Body Side Stiffening Angle	9.10.30
	C	Tailboard Stop Bracket	_
	D	Tailboard Hinge Pin	_
	E/J	Tie bar Stiffening Tube	_
	F	Tailboard Locking Catch slide	_
	K/L/G/H	Side Bottom Cope Bar	_
12422	A	Pipe Clip	3.10.30
	B	Lubricator Pipe clip	_
	C	Pipe Clip stay	_
	D	Stay for lub Drip pipe clip	_
12423	A	Reducing Valve Spring housing	3.10.30
	B	Diaphragm	_
	C	Diaphragm plate	_
	F	Diaphragm	_
	D	Alterations to "Auld" Valve body	_
	E	"Auld" Reducing valve	_
12424		Arrangement of DG6 Three Way Tipping body with 28" hinged steel stays	??
12425	A	Layshaft End Cover -RH	27.10.30
		Adjusting washer	_
		Washer	_
		Locking Washer	_
		Layshaft Nut	_
	L	Driving Shaft Thrust Bearing nut	_
	M	Driving Shaft	_
12426		Arrangement of Sanding gear, geared car	6.10.30
12427		Arrangement of Cab(DE Single Geared loco)(san paulo railway)	8.10.30
12428		Tipping Piston	20.4.32
12429
12430		Arrangement of Sentinel Mark X injector
12431		Arrangement of Superheater	8.10.30
12432		Arrangement of Boiler, Funnel and Ashpan Gear	3.10.30
12433		Arrangement of Steam Brake, DG4 waggon	9.10.30
12434	A	Front Tipping Pivot Channel bracket	9.10.30
	B	Rear Tipping Pivot channel cleat	_
	C	Rear Tipping Pivot Channel gusset plate	_
	D	Ventilator Quadrant bracket pin	_
	E/F	Ventilator Quadrant	_
	G	Ventilator Quadrant handle	_
	H	Arm Rest support	_
12435		Arrangement of Tipping Pivot channel supports	10.10.30
12436	A/B	Tailboard Plate(outside and inside)	9.10.30
	C	Tailboard Catch bar bracket	_
	D	Hoisting Drum spindle	_
	E	Hose Carrying Bracket support	_
		no desription	_
12437		Arrangement of Water Tank	10.10.30
12438	A	Oil Filler Lock bracket	13.10.30
	B	Cylinder Lubricator Locking plate	_
	C	Locking plate pin	_
	D	Locking plate peg	_
	E	Bracket Peg	_
	F	Crankcase Oil Filler	_
	G	Oil Filler Cap	_
	H	Lubricator Body Cover	_
12439		Arrangement of Special DG4 Tipping Waggon body with 3'-10' fixed sides and hinged tailboard	13.10.30
12440	A	Outline of bucket Seat	13.10.30
	B	Bucket Seat Frame	_
12441		Arrangement of Wheels and Axle	15.10.30
12442		Arrangement of Combustion Chamber, 100Hp oil fired boiler	14.10.30
12443		Arrangement of Wind Tunnel	14.6.30
12444		Block for Beating Out Wind Tunnel vanes	14.10.30
12445	A/C	Combustion Chamber Conical Plate	17.10.30
	B/D	Combustion Chamber Wrapper plate	_
12446	A	Reversing Quadrant	14.10.30
	B	Reversing Lever catch	_
	C	Reversing Lever Ctach Rod end	_
	D	Reversing Lever Ctach Rod guide	_
	E	Reversing Lever handle	_
	F/G	Reversing Lever Catch Rod and Rod Collar	_
12447	A/B	Platform Side Bulb angle	14.10.30
	C	Special Drilling in Rear Cross Channel frame no.SB 1787	_
12448	A	Arrangement of Headboard	16.10.30
	B	Body Side Stanchion Knee	_
	C/D	Tailboard Hinge	_
	E/F	Tailboard Protection plate	_
	G	Side Extension Support angle	_
12449		Arrangement of Steam and Exhaust Piping	14.10.30
12450		Arrangement of Sentinel Patent Light locomotive	26.4.?
12451	A/B	Rear Mudguard	16.10.30
	C	Rear Mudguard Centre Bracket	_
	D/E	Rear Mudguard Rear Bracket	_
	F/G	Rear Mudguard Support (rear)	_
	H	Arrangement of Drilling in frame for Rear Mudguard Rear bracket	_
	J	Tipping Body Strut	_
12452		Deatail of Water Tank for DG6T	16.10.30
12453		Arrangement of Springs, Spring Brackets, Axleboxes etc	16.10.30
12454	A	Arrangement of Tank carrying boards for DG6 3way tipper	17.10.30
	B	Arrangement of Tank Bunker	_
12455	A	Burner Bar Boss	16.10.30
	B	Wind Tunnel Bracket	_
	C	Wind Tunnel Support bracket	_
	D	Main Burner Support bar	_
	E	Burner Angle Bracket	_
	F	Wind Tunnel	_
	G	Main Burner Tube	_
	H	Combustion Chamber Support Stiffening	_
12456	A	Tailboard Catch Pin	17.10.30
	B	Extension Washer plate	_
	C	Ventilator Centre bracket	_
	D	Ventilator Quadrant bracket	_
	E	Arrangement of Ventilator fitted on Apron plate	_
12457	A	Enots 90degree Adaptor 1/8" gas to 1/4" gas fig.8	17.10.30
	B	Enots 90degree Adaptor 1/8" gas fig 7	_
	C	Enots 45 degree Adaptor 1/8 gas fig 9	_
	D	Enots 1/8" Gas Grease nipple fig. 1	_
	E	Enots 1/4 gas grease nipple fig 2	_
	F	Enots 1/8"x1/8" gas adaptor fig. 15	_
12458		Assembly of Plates	17.10.30
12459		Detail of Frame for DG 4 Converted	18.10.30
12460		Arrangement of DG6 Three Way Tipping Frame with 40degree side and End tip	20.10.30
12461	A/B	Engine Support and Front End Tipping Pivot	20.10.30
	C	Frame Stiffening plate	_
	D	Engine Support Channel Gusset plate RH	_
	E/F	Rear Tipping Pivot Channel cleat	_
	G	Engine Support Channel Gusset plate	_
	H	Foot plate joint plate	_
12462
12463	A/B	Hoisting Drum
	C/D	Hoisting Drum Outre bracket	_
	E	Hoisting Drum Inner Bracket	_
	F	Pawl	_
	G/H	Spindle Steady Bracket	_
	J/K	Boss	_
12464	A	Tipping Cylinder Support angle gusset plate	21.10.30
	B	Tow Hook	_
	C/D	Step to footplate	_
	E	Tank Level Gauge Elbow plug	_
	F	Tank Level Gauge Elbow plug	_
	G/H	Side Catch Operating Lever Stop	_
	J	Operating Lever Stop Packing plate	_
12465		Drilling in Cross Members for Control Rods, geared car	21.10.30
12466		Tank Arrangement, capacity 600 gallons	21.10.30
12467	A	Fixed Side Supports	23.10.30
	B	Tailboard Hinge	_
	C	Tailboard and Side Front End Protection plate	_
	D	Side Rear End Cover plate	_
	E	Cope Bar	_
	G/F	Floor Cap Cover plate, CANCELLED 7.1.31	_
12468		Layout shewing Drilling and position of Cylinder Lub. Bracket when Spring Loaded Accumulator Brackets are fited, DG4 tipper	22.1.30
12469		Arrangement of Refuse Collecting waggon, DG6 "Over-seas" type	23.10.30
12470		Arrangement of DG6 "Overseas type" waggon for Brick Transport	21.10.30
12471		Arrangement of Funnel and Spark Arrester, geared car	23.3.31
12472	A	Delivery Back Pressure Valve Cap Sirius and Hot Water Injectors
	B	End cap Sirius injector	_
	C	Lifting Tube Sirius Injector	_
	D	Delivery Nozzle Sirius injector	_
	E	Delivery back Pressure Valve Sirius and Hot Water injectors	_
	F	Combined Nozzle (sliding cone)	_
12473	A	Steam Nozzle, hot water injector
	B	Delivery Nozzle, hot water injector	_
	C	Lifting Tube, hot tube injector	_
	D	Sliding Thimble, hot water injector	_
12474		no description, trailer???	25.10.30
12475		Spark Arrester Outer casing, geared car	27.10.30
		Spark Arrester, geared car	_
12476	A	Spark Arrester Top	27.10.30
	B	Gauze Ring	_
	E	Stay for damper Guide Bar Pillar	_
	C	Door catch	_
	D	Door catch Stop	_
	F/G	Cab Side Tee(rear half)	_
	H/J	Cab Side Tee(front half)	_
12477		Arrangement of Steam and Exhaust pipes	27.10.30
12478	A	1/2" Valve
	B	Renewable Valve Seat 1/2"	_
12479		Arrangement showing Holes in Footplate	28.10.30
12480		Arrangement of Front and Rear Sanding Gear, geared car	23.3.31
12481	A	Arrangement of Ladder for DG 6 3way tipper	29.10.30
	B/C	Bunker Plate	_
	D	Bunker Hand Rail	_
	E	Ladder Support angle	_
	F/G	Tank Board Support angle	_
12482
12483		17 T Chain Pinion
12484		Arrangement of Control Rods in Frame, 150HP geared car	4.11.30
12485	A	Arrangement of Air Louvres fitted on Apron plate	30.10.30
	B/C	Apron Plate Louvre shutter	_
	D	Louvre Shutter Handle	_
	E/F	Apron Plate Louvre	_
	G	Louvre Shutter guide	_
	H	Engine Suspension channel gusset	_
	J/K	Apron Plate Louvre Cover plate	_
12486		Diagram of Proposed Sanding gear	30.1.30
12487	A	Firegrate Bevel Wheel	6.11.30
	B	Firegrate Bevel Pinion	_
	C	Firegrate Driving Sprocket	_
	D	Firegrate Driven Sprocket	_
12488	A	Timing Gear Casing cover	5.11.30
	B	Oil Pump Eccentric Spindle	_
	C	Injector Bracket	_
	D	Superheater Steady plate	_
12489		Standard Brake Gear, Under Rigging, for CE and CEDG Loco	3.11.30
12490	A	Arrangement of Headboard fitted to Special 15'-3' x 7'-6' trailer platform	4.11.30
	B/C	Headboard Support	_
	D	Headboard Outside Cope bar	_
	E	Headboard Inisde Centre Cope bar	_
	F	Headboard Outside Centre cope bar	_
	G	Headboard Cope bar	_
12491		Arrangement of Canopy and bunker	3.11.30
12492		Arrangement of DG4 End Tipping Waggon with 3'-10' fixed sides and hinged tailboard	4.11.30
12493		Arrangement of DG4 End Tipping waggon with 46" fixed sides and hinged tailboard	4.11.30
12494	A	Arrangement of Tipping Body Struts	6.11.30
	B	Strut End(top)	_
	C	Strut End(bottom)	_
	D/J	Strut Bottom Fixing bracket	_
	E/F	Strut Top Fixing Bracket	_
	G	Strut Top Fixing pin	_
	H	Strut Bottom Fixing pin, CANCELLED, never used 10.11.30	_
12495	A	Firegrate Pinion Bearing cover	5.11.30
	B	Firegrate Pinion Bearing cover	_
	C	Firegrate Pinion Bearing housing	_
	D	Firegrate Roller Front bracket	_
	E	Firegrate Roller bush	_
	F	Firegrate Roller	_
12496		Rear Axle Casing	5.11.30
12497	A	Centre Partition	23.12.30
	B/C	Cope bar for Enamel Tail Rail plate	_
	D	Cope Bar for Enamel Tail Rail plate	_
	E	Cope Bar for Enamel Tail Rail plate	_
	F	Cope Bar for Enamel Side plate	_
	G	Spring bolt locking plate	_
12498		Arrangement of Steam and hand Brake Gear, BE locos
12499	A	Steering Shaft Bracket, DG 8 waggon	6.11.30
	B	Pump Return Tie Piece	_
	C	Pump Delivery Pipe Nipple(two way valve)	_
	D	Steering Coupling Rod End Clip	_